The emergency console is used when the remote control does not work or in case of loss of the latter.
Button P1 – ON/OF:
Keeping this button pressed, the stove will switch on or off according to the last settings recorded by the remote control.
Button P2 – heat output increase / decrease:
With this button it is possible to select the stove heat output manually.
08.3 REMOTE CONTROL ASSOCIATION
First ignition and association of the radio remote control to the stove: it is necessary to interface the radio remote control to the emergency display. There are 2
possibilities:
1)With the board off, press the two remote control keys (ok+on-off) until the radio id menu appears. At this point press the “-“ key and the word "NEW"
appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Turn on the board and press the "OK" key on the remote control
to confirm.
2)With the board on, press the two keys of the remote control (ok+on-off) until the radio id menu appears. At this point, press the "-" key and the word
"NEW" appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Press the two buttons on the emergency console until all
the LEDs flash. At this point, press "OK" on the remote control to confirm.
08.4 MENU
Press the P4 button to access the menu.
It includes several items and levels to access settings and control board programming.
USER MENU
The table below briefly describes the menu structure, focusing in particular on the functions available to users.
OPERATING MODE menu
In this menu it is possible to choose the operation of our stove. There are 3 operating modes:
•PWR (POWER): operation based on the storage temperature with the air fan off: the stove adjusts its power to bring the storage to the pre-set temperature (the
power of the stove cannot be adjusted. It is possible to increase or decrease the storage temperature by a pre-set percentage by pressing the P2 button.
•CLAS (CLASSIC): operation based on the ambient temperature with the air fan on: the stove adjusts its power based on the ambient temperature.Ventilation can
be activated or deactivated by pressing the P5 key.
•HIBR (HYBRID, di default): operation based on room temperature but in power mode. If the ambient temperature is not satisfied when the storage temperature
is reached, the air fan is also activated. Once the set temperature is reached, the stove switches off.
DISPLAY ADJUSTMENT menu
In this menu it is possible to adjust the settings of the remote control display. You will find:
BACKLIGHT ON: duration of the remote control lighting
POWER ON: duration of the display on
BRIGHTNESS: on or off
CONTRAST: to adjust the display contrast
KEY TONES: to deactivate or activate the remote control keys beep
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eva Calor Costanza at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eva Calor Costanza in the language / languages: English as an attachment in your email.
The manual is 3.63 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
