814107
19
Zoom out
Zoom in
Previous page
1/31
Next page
10. ELECTRONICS WITH 6 BUTTON LCD DISPLAY
10.1 CONSOLE
The console displays information on the status of the product. A variety of data can be displayed and settings carried out according to the level of access by
using the menu.
Depending on the selected mode and on their position on the display, the data visualised may acquire different meanings.
The meaning of the status indicators on the left side of the display:
Active chrono-thermostat
Active ignition spark plug
Active auger tube
Active exhaust blower
Active room ventilation
Active pump
Alarm
Activation in the display of one of the segments in the “status” area indicates activation of the corresponding device.
PANEL DESCRIPTION
BUTTON 1 (P1) – Temperature increase:
When in programming mode, use this button to modify/increase the selected menu value. When in working/switched off mode, use this button to increase the stove
temperature value.
Keeping the P1 Button pressed displays the pellet loading seconds and the actual heat output of the stove.
BUTTON 2 (P2) – Temperature decrease:
When in programming mode, use this button to modify/decrease the selected menu value. When in working mode/switched off, use this button to decrease the
room thermostat temperature value.
Holding Button P2 displays the fume temperature and the fume motor rpm.
BUTTON 3 (P3)Set/menu:
This button allows access to the user and technical parameters menu. After entering the menu, use this button to access the next sub-menu or set the value and
move to the next menu item when in programming mode.
BUTTON 4 (P4) – ON/OFF release:
Hold this button down for two seconds to manually switch the stove on or off respectively depending on its initial on or off status. Should there by any alarms that
have locked the stove, press this button to release it and subsequently to switch it off. After accessing the menu or during the programming phase, use this button
to access the upper menu level. Any changes are automatically saved.
BUTTON 5 (P5) – Heat output decrease:
When in working mode, use this button to decrease the heat output value. In menu mode, use this button to move to the next menu item or, in programming mode,
to go back to the subsequent sub-menu item. Any change is automatically saved.
Holding down the P5 button displays the times of the various phases the stove executes.
BUTTON 6 (P6) – Heat output increase:
When in working mode, use this button to modify the exchanger speed. In menu mode, use this button to go back to the previous menu item or, in programming
mode, to go back to the previous sub-menu item. Any change is automatically saved.
10.2 MENU
Press P3 (MENU) to access the menu.
It includes several items and levels to access settings and control board programming.
The menu items providing access to the technical setting are protected by access code.
USER MENU
The table below briefly describes the menu structure, focusing in particular on the functions available to users.
Menu 01 – SET CLOCK
Use this function to set current time and date. The control board is equipped with a lithium battery guaranteeing the internal time clock a 3/5 year-long life.
10:56
18.5 °C 25 °C
POWER OFF
P1
P2
P3
P4
P5
P6
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor ARIA 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor ARIA 50 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor ARIA 50

Eva Calor ARIA 50 User Manual - German - 31 pages

Eva Calor ARIA 50 User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info