Manual Eurom Siena (page 15 of 44) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

474862

Zoom out

Zoom in

1/44

between the fireplace and the side walls, at least 100 cm. between the fireplace and the ceiling. Do not hang

the device directly under or in front of an electrical socket (see diagram 1).

 The wall supports must be attached horizontally (use a spirit level!) to the wall. Determine the location of the

wall supports (take the above into account), mark the location of the screws and drill 4 holes at the marked

places using a 6 mm drill. Put the plugs into the holes and then screw the wall supports to the wall. Be

aware of pipes that may be contained within the walls when drilling holes!

 Attach the spacer bracket with both self-tapping screws underneath the fireplace in the holes provided. The

flat side of the bracket must be placed against the underside of the fireplace; the other must rest against the

wall so that the wall piece sticks out under the fireplace (diagram 3). This bracket will be hidden from sight

once the glass screen has been installed.

 Now hang the fireplace carefully on the central wall support with the hanging bracket (see diagram 2). The

bracket should not stick out from the support! The electrical cable comes out at the right hand, lower side of

the fireplace and must be placed out of range of the heat.

 Now mark the location at which the spacer bracket must be screwed to the wall. Remove the fireplace from

the wall, drill both holes and insert a plug. Hang the fireplace on the bracket and screw the spacer bracket to

the wall.

 Hang the glass plate (two people are needed for this job!) with the four hooks over the four knobs on the

sides of the fireplace and check that all four hooks are correctly attached (see diagram 4). Secure the glass

plate by tightening the screw that goes through the bracket (which sits on the glass plate).

 Installation is now complete.

Note: ensure that the weight of the fireplace

hangs on the wall supports

and not on the spacer bracket!

Operating

 Check that the details on the data plate correspond to those of the electrical supply which you wish to use

for the fireplace. Do not use the same connection for any other equipment.

 Install two AAA batteries in the remote control.

 Check that the main ON/OFF switch on the right hand, upper side of the fireplace is 'off' (the side with the

circle is depressed).

 Now insert the plug into the socket.

 Switch the fireplace on with the main ON/OFF switch (depress the side with the stripe). You can now further

operate the fireplace with the remote control or with the buttons on the fireplace itself.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Siena in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Siena Manual

Product: