474862

Eurom Siena Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
17. Never leave a working fireplace unattended but switch off and then remove the plug from the socket. Always
remove the plug from the socket if the fireplace is not in use! Remove plug by pulling on the plug itself; never
pull on the cord!
18. Always switch the fireplace off, remove plug from socket and let the fireplace cool down before you:
- clean the fireplace
- carry out maintenance on the fireplace
- touch or move the fireplace
19. The fireplace gets hot during use. In order to avoid burns, never touch the hot surfaces with bare hands!
20. Do not use a timer or similar to switch the fireplace on automatically. You must always check for safe
conditions before using the fireplace!
21. Make sure there is close supervision if this device is used when there are children, incapacitated person or
pets present. Do not allow children to play with the device. This device is not suitable to be operated by
children or those with physical, sensory or mental disabilities or by anyone who does not have knowledge
about or experience with the device.
22. Keep the fireplace clean. Dust, dirt and/or deposits in the fireplace often lead to overheating. Ensure that this
type of build-up is regularly removed. Do not use aggressive products or metal scourers for cleaning the
device as this will damage the housing and parts of the metal may find their way into the electrical parts and
lead to short circuiting.
23. Never switch the device on if you have noticed damage to the device itself, the cable or plug or if it does not
work properly, has fallen or shows any other signs of failure. Take the entire device back to your supplier or
a recognised electrician to be checked and/or repaired. Always ask for original parts to be used.
24. Do not lift the fireplace using the glass plate.
25. Do not use accessories that have not been supplied or approved by the manufacturer.
26. The bulbs are the only parts of this device that the user may replace themselves. Any other repairs to the
fireplace, cable or plug must always be carried out by qualified personnel. Repairs that have not been
carried out correctly may pose a risk!
27. If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent or similar
qualified body or person in order to avoid hazard.
28. Only use the fireplace for its intended purpose and as stipulated in this instruction booklet.
Failing to adhere to instructions 25, 26, 27 and 28 could lead to damage, fire and/or personal injury. This will
invalidate the guarantee and the supplier, importer and/or manufacturer will take no responsibility for the
consequences!
Description
The SIENA comprises an atmospheric fireplace (containing a heating element and ventilator which blows warm
air out of the top of the fireplace), wall supports, a remote control and this instruction booklet.
The atmospheric fireplace is covered with a rounded glass plate at the front. There is a metal cabinet behind
this which contains the atmospheric elements at the front, air grilles at the sides and, on top, the grille which is
used to blow out warm air and the operating panel. The hanging bracket is located at the back and the technical
aspects are housed internally.
The wall supports must be attached to the wall so that the fireplace can be hung on them. Screws, plugs, a
spacer bracket and self-tapping screws are supplied.
There are four buttons on the remote control; one red and three black. The red button switches the atmospheric
screen on; the two upper black buttons are for setting heat levels (900 and 1800 Watt respectively) and the lower
black button (the dimmer) is used to regulate the clarity of the screen.
Please keep the instruction booklet somewhere safe for reference or for providing with the device if it is sold on.
Location and Connection
Remove all packaging material and keep out of reach of children. After removing packaging, check the
appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not
use the appliance, but contact your vendor for inspection or replacement.
Do not use the fireplace before it has been completely installed according to the instructions and you have
read the instruction booklet fully!
This device was designed to be permanently hung on a wall. Ensure the wall is sturdy, completely vertical, is
not sensitive to vibration and is not flammable. Make sure it is not made of synthetic material and or covered
with flammable material. Be aware of pipes that may be contained within the walls when drilling holes.
Choose a suitable location for the fireplace, at least one metre from all obstructions, walls and flammable
materials (see safety instructions) and in the vicinity of a 16 Amp (at least) fused, earthed electrical socket
(protected by a 30 mA earth leakage circuit breaker). This socket must be located to the right of the
fireplace.
There must be at least 30 cm distance between the base of the fireplace and the ground, however, you are
advised to place the fireplace at a height of 60 cm. for the best sight. There must be at least 20 cm distance
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Siena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Siena in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info