474862
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
If the device overheats again or you cannot ascertain the reason for this, take the fireplace to your service point to
be checked/repaired.
Caution: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched
on and off by the utility.
The other overheating safeguard switches the heater off definitively: it can no longer be reset. Refer to your
supplier for repairs.
Cleaning and maintenance
Always remove the plug from the socket and let the fireplace cool down before cleaning or touching.
The Siena atmospheric fireplace does not need much maintenance. Always keep the in- and outlet openings
clean and dust-free. Use a soft cloth or a soft brush to clean the outside of the metal case. The glass plate can
also be cleaned with a soft cloth. Do not use abrasive cleaning fluids or special glass cleaners!
Apart from the bulbs, the fireplace contains no parts which need to be replaced by the user. If the device
malfunctions, immediately remove the plug from the socket and take to a service point. Do not carry out repairs
yourself and always ask for original parts to be used.
If the fireplace is to be stored after the winter period, clean it, pack it in original packaging if possible and store in
a cool, dry and clean place. Make sure the fireplace is kept upright.
Problems and solutions
If the fireplace will not work check the electrical supply. Is the socket working properly? Has the fuse blown?
If the fireplace stops working suddenly, it may mean that the overheating safeguard has been triggered (see

If the atmospheric lighting is not working or does not work properly, one or more of the bulbs may need to be

In the event of other defects, immediately switch the fireplace off, remove the plug from the socket and consult a
supplier or recognised electrician. Never carry out repairs yourself as this invalidates the guarantee and may be
dangerous!
CE Statement
The undersigned Euromac bv., Kokosstraat 20, 8281 JC Genemuiden hereby declares that the product below:
electric ventilator fireplace with atmospheric screen (220-240V, 1800W) known under the brand EUROM,
type Siena, meets the requirements of the LVD 2006/95/EC and EMC 2004/108/EC.
Norms applied:
EN 60335-1 :2002+A1+A11+A12 EN 55014-1 :2006
+A2+A13 EN 55014-2 :1997+A1
EN 60335-2-30 :2003+A1+A2 EN 6900-3-2 :2006
EN 62233 :2008 EN 6900-3-3 :1995+A1+A2
Genemuiden, 11-05-2011
W.J. Bakker, alg.dir.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Siena at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Siena in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info