Caution: You may need a second person to assist you in loading the bicycle rack bracket.
Mounting the bicycle to the bicycle rack bracket
Open the frame holder of the holding bracket by turning the knob nut anti-clockwise. Fold the holding bracket down and rest on the wheel rail.
Position the bicycle on the wheel rail, with the front wheel on the side of the base plate of the holding bracket. Slide the bicycle backwards into
the wheel rail until it is possible to stand the holding bracket up in front of the bicycle frame. Set the inclination of the holding bracket so that it
forms a right angle with the bicycle frame. Now slide the bicycle forwards until the frame is in the frame holder of the holding bracket. Close the
frame holder by rotating the knob nut clockwise. Make sure that the tube of the bicycle frame is securely encompassed by the holding bracket of
the frame holder. Fold the pivoting threaded rod with the lockable knob nut into the fork opening of the holding bracket. Tighten the knob nuts.
You can only lock the lockable knob nut when it is rmly tightened. Turn the key to the red marking on the lock symbol and remove the key. Your
bicycle is now secured to prevent theft.
The wheels are secured by placing the tensioning straps through the eye of the strap guide, around the wheel rail and the rim of your bicycle
and tightening the straps.
When travelling with the bicycle rack bracket empty, secure the holding bracket to the wheel rail using a tensioning strap.
• After use, store the bicycle rack in a clean and dry place. Wash o any dirt with water.
• Check the bicycle rack bracket regularly for damages. Damaged or worn parts must be replaced immediately. Only original replacement
parts may be used.
• Check the bolts and nuts of the bicycle rack regularly and tighten when necessary.
• Immediately treat any damage to paintwork with paint.
Maintenance and care
Notes regarding environmental protection
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials can be recycled. You make an important contribution to protecting our environment by recycling, material utilisation or other
forms of reusing waste equipment!
Caution: The front wheel must be secured using two small tensioning straps to prevent it from turning.
Now feed one U-shaped bracket, from below, through the drilled holes of the base plate. Fit the washers
and knob nuts to the threads of the U-shaped bracket. Tighten the nuts gently. Do the same on the other
side.
Align the bicycle rack bracket parallel to the vehicle axis. Pay attention to ensure that no parts of the
bicycle will protrude beyond the vehicle body when the bicycle is subsequently mounted. Now tighten
up all screws and nuts.
Insert the strap guide into the T-groove at the end (the longer part, seen from the base plate) of the
wheel rail where the bicycles rear wheel will later be attached. At the other end (the shorter part, seen
from the base plate), position the two other strap guides for securing the front wheel.
Fit the end caps onto the ends of the wheel rail.
Fit the clamp arch to the threaded bolts of the U-shaped bracket. Make sure that the lateral metal
edges of the clamp arch are facing downwards. Now t the washers and knob nuts to the threads of the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eufab 12015 - Alu Star at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eufab 12015 - Alu Star in the language / languages: English, German, French, Italian as an attachment in your email.
The manual is 1.86 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
