807230

Eufab 12015 - Alu Star Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
5
• Keep children away and do not allow children to operate this device!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• Never exceed the permitted roof load of your vehicle. To check this, consult the manual of your vehicle, or ask the manufacturer.
• Remember that the behaviour of the vehicle when driving with a roof load will change considerably under braking, with side winds and
when negotiating curves. Adapt your driving style accordingly.
• Remove all parts that may be lost before starting your journey, this includes air pumps, batteries of electric bikes, drinking bottles, bat-
tery-powered lamps, navigation systems, bicycle computer, tool bags or baskets.
• Remove all bags from the bicycle before starting your journey.
• Do not use protective covers for the bicycle during the journey.
• Pay attention to the increased height of your vehicle with the bicycle mounted on the roof, especially when negotiating tree-lined roads,
tunnels, underground garages and multi-storey car parks.
• Prior to each journey, check the roof rack, the bicycle rack and the bicycle and ensure that they are securely and rmly mounted.
• After a short stretch, check the rm and safe seating of the roof load and continue to check at regular intervals.
• When not in use, remove the bicycle rack bracket for trac safety reasons.
• Never drive faster than 130 km/h when the bicycle rack bracket is mounted.
Safety precautions
Operating instructions
Mounting the bicycle rack bracket:
Finishing the holding bracket
The bicycle rack bracket must be nished. Take all of the components out of the packaging and set them out clearly. Check the scope of delivery.
Every stage is described and clearly shows which components are required for the assembly of the bicycle rack bracket.
1 x Wheel rail with holding brackets
1 x Lock screw M8 x 120
1 x Coil spring 10 x 80
1 x Knob nut M8
1 x Knob nut M8, lockable
3 x Washer 15.8 x 8.5 x 1.1
Insert the lock screw from the outside, through the bar of the holding bracket which has a pivoting threaded rod at the end of it. Now, using the
following order, t a washer, the coil spring, and a second washer to the lock screw. Compress the coil spring and guide the lock screw through
the drilled hole on the other bar of the holding bracket. Push both bars together in such a way that the thread of the lock screw protrudes from
the bar by approximately 15 mm. Fit the third washer onto the lock screw and then screw the knob nut onto the thread. Screw the lockable knob
nut onto the pivoting threaded rod.
Mounting the bicycle rack bracket onto the roof rack
1 x Wheel rail w. mounted holding brackets
2 x U-shaped bracket M6 55 x 55
1 x U-shaped bracket M6 55 x 55 with at bridge
1 x Clamp arch
6 x Knob nut M6
6 x Washer 11.8 x 6.5 x 1.3
3 x Strap guide
First remove the end caps from the wheel rail. Undo the nuts on the underside of the base plate in such
a way that it can slide along the wheel rail. Place the U-shaped bracket with at bridge in the T-groove
on the underside of the wheel rail. Place the wheel rail loosely on your roof rack. Pay attention to ensure
that the knob nuts of the holding bracket will subsequently face the out from the vehicle. Align the wheel
rail in such a way that both ends protrude beyond the cross-piece of the roof rack by the same amount.
Now slide the base plate on the wheel rail until the cross-piece is located between the drilled holes of
the base plate. Slide the U-shaped bracket in such a way that the other cross-piece is located between
the threaded bolts of the U-shaped bracket. In doing so, do not change the position of the wheel rail.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 12015 - Alu Star at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 12015 - Alu Star in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info