The bicycle rack must be nished. Take all of the components out of the packaging and set them out clearly. Every stage is described and you are shown which
components are required for the assembly of the rack.
Place the four wheel rail halves parallel on the rack base so that the drilled holes of the rails match the drilled holes of the rack base. Secure the wheel rails using
the lock screws M6 x 50, M6 washers and M6 nuts.
Join the two halves of the lighting set together. This is made easier by the small guide element which is
already mounted on one side. Push the rails together and secure the connection with the cross-headed
screw (M5 x 12) and washer (Figure 2).
Insert the cross-headed screws M5 x 35 with spring washers and washers, from below, through the
vertical drilled holes of the lighting mount. Insert the screws through the threaded holes on the
underside at the end of the lamp mount. Tighten the screws.
Make sure that the fog light is installed on the left side of the rack base!
1 Rack base
2 Wheel rail halves
3 Lock screws M6 x 50, washers and nuts
4 Cross-headed screws M5 x 35, spring washers and washers
5 Cross-headed screw and washer
6 Lighting set
Figure 1: Individual parts, Step 1
Figure 2: Lighting set
Figure 3: Fixture of lighting set
5.1 COMPLETING THE BICYCLE RACK
5.1.1 STEP 1, RACK, WHEEL RAIL, LIGHTING SET
5. OPERATING INSTRUCTIONS
Figure 4: Result of Step 1
Result:
Figure 5: Individual parts, Step 2
5.1.2 STEP 2, USHAPED BRACKET, FRAME HOLDER
7 U-shaped bracket
8 Knob nuts
9 Lock screws M8 x 60
10 Washer M8
11 Frame holder, short
12 Frame holder, long
Place the U-shaped bracket (7)on the U-shaped bracket mount of the rack base. Secure the U-shaped bracket with the supplied lock screws M8 x 60 (9), washers
(10) and knob nuts M8 (8). The knob nuts must be mounted on the inside (see Figure 7).
Assembly of U-shaped bracket
The general operating permit must be carried in the vehicle when the rack is mounted.
Do not travel with the bicycle rack empty. Store it in the boot of your vehicle. This prevents increased fuel consumption and
protects the rack.
The driver is always responsible for ensuring that the load and the load securing meet the regulations.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eufab 11565 - Amber Plus at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eufab 11565 - Amber Plus in the language / languages: English, German, French, Italian as an attachment in your email.
The manual is 2.91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
