807227

Eufab 11555 - Amber III Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
11
the trailer tow bar. Undo the lock nut of the adjusting screw and rotate the
adjusting screw on the quick locking mechanism tighter by a quarter turn.
Then tighten the lock nut again.
Replace the rack back on the trailer tow bar and check whether the rack is
securely and  rmly positioned on the tow bar. Repeat the adjustment process
until the rack is secure and  rm.
When the rack is  rmly seated on the trailer tow bar, rotate the securing bolt
of the quick locking mechanism until it engages. Now close the quick locking
mechanism with the supplied padlock and remove the key from the lock.
Store the key carefully and in a safe place. The bicycle rack is now secured to
prevent theft.
Regularly check the  rm seating of the rack on the trailer tow bar as well as
the attachment of the bicycles to the rack. Also regularly check the functions
of the lighting system of your bicycle rack.
Always make sure that the lock nut of the adjusting
screw is correctly tightened!
If you wish to operate the folding mechanism, always hold the
U-bracket with one hand to ensure that the rack is not able to
fold out suddenly. (Risk of injury)
Slight signs of pressure on the two bar ball are normal
and do not in uence the functionality.
CAUTION
To open the car boot, you may fold the rack down, even if bicycles are mounted.
To do this,  rst loosen the block of the folding mechanism by pushing the
locking bolt down (1)and pushing the handle away from you (2). Hold the
U-bracket or bicycles with one hand, with the other hand pull the lever of the
folding mechanism upwards(). Now you can fold the rack down.
Folding mechanism
1
2
3
Folding the bicycle rack up
Raising the rack platform engages it back into the transport position (you will
hear a click). Secure the folding mechanism again by pushing the locking bolt
down and pulling the handle towards you.
Mounting the bicycles to the rack
Since the frame holders are not tied to any speci c position, you may try out
a number of positions. It is important to ensure that the frame holder is  tted
as high as possible.
Position the  rst bicycle in the  rst wheel rail (the wheel rail closest to the
vehicle). Connect the frame of the bicycle to the U-bracket using the short
frame holder.
Place the second bicycle in the middle wheel rail, facing the opposite direction
to the  rst. Connect the frame of the second bicycle to the U-bracket using the
long frame holder.
Place the third bicycle in the third wheel rail, facing the opposite direction
to the second. Connect the frame of the third bicycle using the loose frame
holder (the one with two tensioning straps) to the frame of the second bicycle
The rack may not be used without the additional lock
securing mechanism.
The bicycle rack may not be used without this safety
strap.
Secure the wheels with the supplied short tensioning straps. Use one
tensioning strap to secure the rear wheel and two for the front wheel (see
picture) to prevent them from turning.
Now secure the bicycles with the long safety strap. Wrap the safety strap
through the bicycle frames and the U-shaped bar and tighten.
The bicycles are removed in reverse order.
Safety strap
When transporting e-bikes, the payload of the bicycle
carrier and the maximum load capacity of each individual
bicycle rail must not be exceeded.
Mount e-bikes only on the bicycle rails 1 and 2, see picture.
Maximum load capacity of the
bicycle rails:
rail 1: 27.5 kg
rail 2: 27.5 kg
rail 3: 20.0 kg
7. TRANSPORT OF EBIKES
11
Mount e-bikes only on the bicycle rails 1 and 2, see picture.
Maximum load capacity of the
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11555 - Amber III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11555 - Amber III in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info