807227
12
Zoom out
Zoom in
Previous page
1/44
Next page
12
11. NOTES FOR ENVIRONMENTAL PROTECTION
As the bicycle rack has a lighting system, it is subject to the
Ordinance on Waste Electrical and Electronic Equipment and
must be disposed of as waste electrical and electronic equipment
once its service life has expired.
The materials are recyclable. You make an important contribution
to protecting our environment by recycling, material utilisation
or other forms of reusing waste equipment.
12. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Right-hand tail light
(incl. marker light)
Pin 5, 58R
Left-hand tail light
(incl. marker light)
Pin 7, 58L
Charging cable -/ ground
(for battery in trailer)
Pin 11 not used
Control cable for trailer identi cation
(connection)
against ground pin 3 in trailer
Pin 12
Ground for contact 1 - 8
Pin 3, 31
Charging cable
Pin 10 not used
Brake light
Pin 6, 54
Right indicator
Pin 4, R
Left indicator
Pin 1, L
Reversing light
Pin 8
Rear fog light
Pin 2, 54G
Steady current (steady plus)
Pin 9 not used
Ground for contact (power supply)
Pin 13 not used
9. TIPS AND TRICKS
9.1 PIN ASSIGNMENT OF THE 13PIN CONNECTOR
yellow
blue
white
green
brown
red
black
grey
brown/blue
brown/red
white/black
Plug Socket
54G
R
58R
54
L
31
31
58L
54G R
58R
31
L
31
58L
54
Required tools: Screwdriver of PH1 size. Unscrew the cross-head screws of the
lens and remove the lens. Press the bulb to be replaced lightly into the socket
and then turn it a quarter of a turn. Now remove the bulb from the socket.
Insert the new bulb in the appropriate position.
List of bulbs:
Brake light/ Rear light: 12 V 21/5 W BAY15d
Indicator: 12 V 21W BAU15S orange
Rear fog light: 12 V 21W BA15S
Reverse light: 12 V 21W BA15S
Licence plate illumination: 12 V 5W SV8,5 11 x 38 (So t)
10. CHANGING THE BULBS
8. MAINTENANCE
After use, store the bicycle rack in a clean and dry place. Wash any mud or
other dirt o using water.
Keep the trailer coupling clean and free of grease
Keep the rack tow bar clean and free of grease.
Check the bicycle rack regularly for damages. Damaged or worn parts must
be replaced immediately. Only original replacement parts may be used.
Check the bolts and nuts of the bicycle rack regularly and tighten when
necessary.
Immediately treat any damage to paintwork with paint.
Regularly lubricate rotating and moving parts.
If you transport an e-bike on rails 1 or 2, the other bikes
must be correspondingly lighter so that the bike carrier is not
overloaded. Before loading, determine the weight of each
bicycle (e.g. using a personal scale).
Load the bike carrier so that the maximum payload is not exceeded. See
section 3. Speci cations.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11555 - Amber III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11555 - Amber III in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info