Manual Etrel Gen 6 (page 45 of 54) (English)

802074

Zoom out

Zoom in

1/54

4. The charging starts in the socket where the charging cable was plugged in. The plug is

locked into the socket while charging,

5. The LCD display shows the current status of the socket in which a vehicle is charging.

The display also shows the current energy consumption during charging,

6. The user can finish the charging by logging off (with the RFID card or SMS message) or

unplugging the cable on the EV side. If the user logs off but forgets to unplug the

charging cable, the station will notify the user through the LCD display with a warning to

unplug the cable.

The user is advised to follow the instructions for use, printed on the instructions label on the

face plate of the charging station, and the instructions which are provided by the LCD display of

the station during the charging process.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etrel Gen 6 Manual

Product: