Manual Etrel Gen 6 (page 44 of 54) (English)

802074

Zoom out

Zoom in

1/54

7 Instructions for use

The EV owner uses the charging station in the following way:

1. The charging cable is plugged into the vehicle,

2. The charging cable is plugged into available charging socket of the right type,

3. The charging station notifies the user through the LCD display to proceed with the

identification before charging. Identification is not required for »plug and charge«

charging stations which begin charging as soon as the cable is plugged into the socket.

Based on user settings in the database, the desired language for the user interface is

selected automatically. User identification can be performed in two ways:

a. With the use of an RFID card. The charging service provider issues smart

identification cards. The service provider can also provide support for cards,

issued by other providers in case of roaming. If the system fails to recognise the

identification card, LCD display will show the message: » Could not login. No

such user«. After the user has been successfully identified, the charging can

start. In some cases identification can be interrupted due to an expired contract,

blocked card, limit overdraft, etc. In all these cases, the charging station will

notify the users of their status. If the charging station can not communicate with

the control centre and thus perform authorisation, it will allow charging to any

identification and only later send over the charging session and billing data to

the control centre, once the communication is re-established

b. With the use of SMS service. Some service providers enable SMS identification of

their users. The user sends an SMS message to the number, printed on the

instructions label (on the station's face plate). The message must contain the

right keyword, the ID of the station, and the ID of the socket, for example:

“START SI06001 1”. The result of the identification is returned in the

confirmation message. If the identification is successful, the charging of the

plugged-in vehicle can start. If the vehicle is not yet plugged in, the LCD display

will show the message: »Plug the vehicle into socket x«. If identification is

successful and the user does not plug in the vehicle in the next 5 minutes, the

identification expires and the user needs to repeat the procedure,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etrel Gen 6 Manual

Product: