621618

Ergofix 79576 Manual

21
Zoom out
Zoom in
Previous page
1/49
Next page
ERGOFIX
19
grounded surfaces (e.g. pipes radiators, rangs, refrigerators).
4. All visitors should be kept away from the work area, especially children.
5. When not in use, tools should be stored in a dry, high or locked up place,
out of reach of children.
6. Do not force small tools or attachments to do the job of heavy duty tools.
Do not use tools for purposes not intended, for example do not use circular
saws to cut three limbs or logs.
7. Do not wear loose clothing or jewelry, they can get caught in moving parts.
Rubber gloves and non-skid footwear are recommended when working
outdoors. Wear protecting hair covering to contain long hair.
8. Use safety glasses. Also use face or dust mask if the cutting operation is
dusty.
9. If devices are provided for the connection of extraction and collection
facilities, ensure these are properly connected and properly used.
10. Do not abuse the cord. Never carry the tool by the cord or yank it to
disconnect it from the socket. Keep the cord away from heat, oil and sharp
edges.
11. Use a clamp or a vice to hold the work piece. It is safer then using your
hand and it frees both hands to operate the tool.
12. Do not overreach. Keep proper footing and balance at all times.
13. Maintain tools with care. Keep cutting tool sharp and clean for better and
safer performance. Inspect extension cords periodically and replace if
damaged. Keep handle dry, clean and free from oil and grease.
14. Disconnect the tools when you are not using the lathe, before servicing
and when you change accessories such as blade, bits and cutters.
15. Remove adjusting keys and wrenches before you turn on the lathe.
16. Avoid unintentional starting. Do not carry a plugged-in tool with a finger on
the switch. Ensure switch is off when plugging in.
17. When tool is used outdoors, use only extension cords intended for outdoor
use.
18. Stay alert. Watch what you are doing, use common sense. Do not operate
tool when you are tired and do not drink alcohol before or during operation.
19. Check damaged parts. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, free running of moving parts, breakage of parts, mounting
and any other conditions that may affect its operation. Have defective
switches replaced by an authorized service facility. Do not use the tool if
the switch does not turn it on and off.
20. The use of any accessory or attachment, other than those recommended
in this instruction maual, may present a risk of personal injury.
21. Repairs should only be carried out by qualified persons using original spare
parts.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 79576 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79576 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info