621618

Ergofix 79576 Manual

23
Zoom out
Zoom in
Previous page
1/49
Next page
ERGOFIX
21
7. Always use the right tools and stand at the proper position when performing
your work.
8. Do not change the gear when the machine is in operation.
9. Always keep a proper distance from the machine in order to avoid being
struck by a broken workpiece.
10. It is important to put the protector on and lock it before operation, as a
safety precaution.
GEAR RATIO
Before threading work, according to the thread pitch, check out the gear charts
and indicator table on page 33, 34 and 35.
5. ADJUSTMENT AND REPLACEMENT OF PARTS
For safety concern, every adjustment on machine should be operated
under no electricity.
Replacement of jaws
The jaws are of two types: the internal jaws and the
external jaws. Please pay notice that he number of
jaws fit with the number inside the chuck’s groove.
Do not mix them together.
When you are going to mount them, please mount
them in ascending order, when you are going to take
them out, be sure to take them out in descending
order (3-2-1) one by one. After you finisch this
procedure, rotate the jaws to the smallest diameter
and check that the three jaws are well fitted. If not,
you need to reassemble them again as they are not
properly assembled.
When you are going to mount the work piece you
need only to loosen one jaw. However, we
recommend that you loosen the three jaws at the
same time. In this way you can protect them and will
not hurt the thread inside.
Tailstock rest adjustment
When you are going to change position or
replace the tailstock you need to loosen the nut
as shown in (A) of drawing.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 79576 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79576 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info