621618

Ergofix 79576 Manual

20
Zoom out
Zoom in
Previous page
1/49
Next page
ERGOFIX
18
- The noise level during operation is about 70 –75 dB(A).
- The temperature range suitable for the operation and storage of this
machine is +10 till +40°C.
d/ Special warning:
- After interruption due to power failure, there exists the risk of accidentally
running up. Be sure to pay attention to this risk and turn off the machine as
soon as the machine interrupts.
- Always wear approved eye protection during operation.
e/ Correct handling of this machine:
- The net weight of this machine is 42 kg. It would be better to handle this
machine with the help of appropriate lifting tool.
- If the operator has to handle this machine without lifting tool, be sure you can
afford this weight and handle it with care and with common sense for your
own protection.
2. TECHNICAL DATA
Center height : 90 mm
Max. distance between the centers : 350 mm
Swing over bed : 180 mm
Swing over cross slide : 100 mm
Smal slide travel : 65 mm
Cross slide travel : 55 mm
Spindle bore : 20 mm/MC 3
Spindle speeds (rpm) : Varispeed: 100 – 3000
Lead schrew:
Metric threads : 0,4 – 2,0 mm (10 steps)
Inch threads Imperial : 12 – 52 T.P.I. (18 steps)
Spindle travel : 50 mm/MC 2
Motor : 0,35 kW, 230 volt/50 Hz
Accessories : gear changes, claws, chuck and
tool holder wrench
Dimensions (lxwxh) : 720 x 280 x 280 mm
Net weight : 42 kg
Gross weight : 45 kg
Order number : 79576
3. GENERAL SAFETY INSTRUCTIONS
Regular maintenance increases the life of your lathe.
1. Keep the work area clean.
2. Do not expose power tools to rain. Do not use power tools in damp or wet
locations. Keep work area well lit. Do not use power tools where there is a
risk to cause fire or explosion.
3. Guard against electric schock. Avoid body contact with earthed or
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 79576 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79576 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info