617685
165
Zoom out
Zoom in
Previous page
1/198
Next page
U “Heating & Drying” on page 89
First, configure Heater Temperature as
described below.
1) Configure temperature settings for the pre-,
platen, and after heaters to a temperature
higher than the normal setting temporarily.
2) Perform bidirectional printing and check if
the print results have improved.
3) If the problem is not resolved, set temperature
settings for the pre-, platen, and after heaters
slightly lower.
Repeat Steps 2 and 3 until print results are im‐
proved.
If changing the Heater Temperature does not
resolve the problem, adjust Drying Time Per
Pass in the following manner.
1)
Set the setting value to 0.1.
2) Perform bidirectional printing and check if
the print results have improved.
3) If the problem is not resolved, raise the setting
value further.
Repeat Steps 2 and 3 until print results are im‐
proved.
If the measures above do not resolve the problem,
perform the following measure.
E
Checking the microweave (M/W) setting
The RIP microweave (M/W) setting may be
inappropriate.
Refer to the microweave (M/W) setting and
banding association table researched by Epson,
change the settings according to the media being
used, and then check for improvement.
Microweave (M/W) setting and banding
association table researched by EpsonU
“Microweave (M/W) Setting and Banding
Association Table” on page 180
Stains Due to Head Striking
The media and print head are contacting during
printing.
Perform the following sequence until the print results
have improved.
A
Cut sections of media with wrinkles or waviness
If media is stored inappropriately or left loaded
in the printer, wrinkles and waviness may occur.
If media is used in this state, the print head and
the raised surface of the media may contact and
cause staining. Cut sections with wrinkles or
waviness before using media.
Furthermore, store media as described in the
manual accompanying the printer and load
media in the printer just before printing.
If the problem is not resolved even when printing
on sections without wrinkles or waviness,
perform the following measure.
B
Loading the media in the printer correctly and
configuring the media settings appropriately
If the media loading method, heating
temperature, tension, suction and other settings
are inappropriate, wrinkles and waviness occur
on the media. Make sure the loading method and
settings are correct.
U “Loading and Exchanging Media” on
page 33
U “Precautions regarding settings” on
page 84
If the measures above do not resolve the problem,
perform the following measure.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
165
165


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info