617685
166
Zoom out
Zoom in
Previous page
1/198
Next page
C
Adjusting the Heater Temperature
The heater temperature setting may be too high.
Configure Heater Temperature as described
below.
1) Configure the temperature setting of each
heater to the following temperatures
temporarily.
Pre-heater: 30, platen heater: 30, after heater:
40
U “Heating & Drying” on page 89
2) Print and see if waviness has improved.
If the waviness of the media improved, the
heater temperature setting was too high.
3) While gradually raising the pre-heater, platen
heater, and after heater temperature settings,
repeat test printing until the optimal state is
reached.
If the problem is not resolved after performing 1,
return Heater Temperature to the original
setting, and then perform the following measure.
D
Adjusting Media Tension
Adjustment of Media Tension differs by the
media used.
When using vinyl, transparent or milky white
film, or canvas
Use the following procedure to adjust Media
Tension.
1)
Set the setting value to 2 temporarily.
U “Customize Settings” on page 145
2) Print and check if the print results have
improved.
3) If the problem is not resolved, raise the setting
value one level.
Repeat steps 2 and 3 until print results are im‐
proved in the range up to a setting value of 5.
If you are using SC-S70600 series or SC-S50600
series and adjusting the Media Tension does not
resolve the problem, perform the following
measure.
1)
Set Feed Speed to Lv1.
U “Customize Settings” on page 145
2)
Set the Media Tension setting value to 2
temporarily.
3) Print and check if the print results have
improved.
4) If the problem is not resolved, raise the
setting value one level.
Repeat steps 3 and 4 until print results are im‐
proved in the range up to a setting value of 5.
If the measures above do not resolve the prob‐
lem, return the Media Tension setting to default
and perform the following measure.
On the SC-S30600 series, if adjusting Media
Tension does not resolve the problem, return
the Media Tension setting to default and
perform the following measure.
When using banners
Find the procedure for your printer model below
and adjust Media Tension.
When using the SC-S70600 series or SC-S50600
series
1)
Set the setting value to 2 temporarily.
U “Customize Settings” on page 145
2) Print and check if the print results have
improved.
3) If the problem is not resolved, raise the
setting value one level.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
166
166


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info