617685
164
Zoom out
Zoom in
Previous page
1/198
Next page
Ink drops
o
Is media being handled appropriately?
If the following points are not observed when
handling media, small amounts of dust and lint may
stick to the media surface and cause ink drops in the
print results.
Do not place exposed media directly on the floor.
Media should be rewound and inserted in its
original packaging for storage.
Do not carry media with the media surface
pressed against clothing.
Handle media in its individual packaging until
just before loading the media in the printer.
Horizontal stripes or tint unevenness
(banding)
Multiple causes are possible.
Perform the following sequence until the print results
have improved.
If the following problems remain unsolved, this
symptom will not be able to be resolved by taking any
actions. Before taking any actions, check that such
problems have been resolved.
Nozzles are clogged.
U “Checking for clogged nozzles” on page 128
Media settings are not configured correctly.
U “Saving media settings” on page 83
A
Check the attachment of the media holding
plates
If a media holding plate is not installed correctly,
media feeding may be disturbed. See the
following reference and reattach the media
holding plates.
U “Loading and Exchanging Media” on
page 33
If installing the media holding plate correctly still
does not resolve the problem, perform the
following measure.
B
Resolving ink sedimentation
Ink sedimentation (components settling to the
bottom of the liquid) may occur inside the
printer. Perform Ink Refresh.
U “Ink Refresh” on page 132
If this error recurs after Ink Refresh was
performed, take the following action.
C
Feed Adjustment
Feed adjustment may be required independently
depending on the media used. If the roll width is
different, independent adjustment is required
even with the same media. In Media Adjust,
select Feed Adjustment - Manual - 500mm
Pattern to make adjustment.
U “Changing settings during printing” on
page 89
If feed adjustment does not resolve the problem,
perform the following measure.
D
Resolving ink drying time differences
During bidirectional printing, print head
movement may cause an ink drying time
difference. Firstly, perform unidirectional
printing from RIP. If this improves the print
results, change the Heater Temperature or
Drying Time Per Pass, and adjust so that stripes
and unevenness are improved during
bidirectional printing.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Problem Solver
164
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SureColor SC-S50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SureColor SC-S50600 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SureColor SC-S50600

Epson SureColor SC-S50600 Installation Guide - English, German - 56 pages

Epson SureColor SC-S50600 User Manual - German - 217 pages

Epson SureColor SC-S50600 Installation Guide - Dutch - 56 pages

Epson SureColor SC-S50600 User Manual - Dutch - 182 pages

Epson SureColor SC-S50600 Installation Guide - French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info