655253
48
Zoom out
Zoom in
Previous page
1/135
Next page
When changing Advanced Settings after saving
media settings
Media Adjust (Auto)
This option is displayed when selecting Adhesive
Vinyl or Banner in Media Type.
Perform feed adjustment and head alignment while
printing a pattern just like auto adjust in Easy Media
Setup.
The approximate maximum length of the media
required to print the test pattern is given below.
Approx. 270 mm
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit,
attach the media to the roll core.
U “Loading media” on page 26
U “Using the Auto Take-up Reel Unit” on
page 32
B
Press the Menu button.
The settings menu will be displayed.
C
Select Media Setup - Customize Settings -
Media Adjust - Auto.
D
When you press Z, auto adjust starts, and an
adjustment pattern is printed.
Wait until adjustment is complete.
Media Adjust (Manual)
During manual adjustment, you can perform Feed
Adjustment and Head Alignment separately.
Feed Adjustment
This menu is used when banding (horizontal banding,
tint unevenness, or stripes) is detected in printing
results.
You can select Standard or 500mm Pattern to make
adjustments.
Standard
Usually, this is selected.
This option is not displayed when selecting Textile in
Media Type.
500mm Pattern
This is useful for making accurate print adjustments
when printing on uneven media such as canvas or
media that bleeds-through easily, such as cloth.
The approximate maximum length of the media
required to print the test pattern is given below.
When performing Standard: Approximately 130 mm
When performing 500mm Pattern: Approximately
770 mm
Setting procedure
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit,
attach the media to the roll core.
U “Loading media” on page 26
U “Using the Auto Take-up Reel Unit” on
page 32
B
Press the Menu button.
The settings menu will be displayed.
C
Select Media Setup - Customize Settings -
Media Adjust - Manual - Feed Adjustment.
D
Use the d/u buttons to select Standard or 500
mm.
E
Press the Z button to print the adjustment
pattern.
Wait until printing is complete.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info