655253
49
Zoom out
Zoom in
Previous page
1/135
Next page
F
Check the printed adjustment pattern.
When Standard is selected
Two groups of adjustment patterns, A and B,
are printed. Select the pattern with the least
amount of overlapping or gaps for each group.
Select "0.0" in the cases shown below.
If there are patterns where the overlapping or
gaps are the same, enter the middle value in
step 7. Enter "-0.05%" in the cases shown below.
If all of the adjustment patterns contain
overlapping or gaps, select the pattern with the
least overlaps or gaps.
In this situation, follow the steps below to
complete media feed adjustment, and then
perform 500mm Pattern for media feed
adjustment.
When 500mm Pattern is selected
Measure using a scale of up to 0.5 mm.
G
The screen for entering confirmation results for
the adjustment pattern is displayed.
When Standard is selected
Set the values printed under the patterns
selected in A and B, and then press the Z
button.
When 500mm Pattern is selected
Set the value established in step 6, and then
press the Z button.
When settings are complete, the status display
screen is displayed.
Head Alignment
Depending on the model or setting status being used,
the maximum length of the media required to print
the test pattern differs as shown below.
Model/Status Length of Media
Used
SC-S40600 Series
In one head mode for
SC-S80600 Series/SC-S60600
Series
Approx. 50 mm
*1
In two head mode for
SC-S80600 Series/SC-S60600
Series
Approx. 70 mm
*2
*1 In one head mode for 10 color mode in SC-S80600 Series
when MS installed, approximately 80 mm
*2 In two head mode for 10 color mode in SC-S80600 Series
when MS installed, approximately 120 mm
Setting procedure
A
Check that the printer is ready, and load the
media according to the actual usage conditions.
When using the Auto Take-up Reel Unit,
attach the media to the roll core.
U “Loading media” on page 26
U “Using the Auto Take-up Reel Unit” on
page 32
B
Press the Menu button.
The settings menu will be displayed.
C
Select Media Setup - Customize Settings -
Media Adjust - Manual - Head Alignment.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
49
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info