655253
47
Zoom out
Zoom in
Previous page
1/135
Next page
Measure using a scale of up to 0.5 mm.
J
The screen for entering check results for the
adjustment pattern is displayed.
When anything except Textile is selected
Press the d/u buttons and set the value printed
under the pattern selected in group A from step
9, and then press the Z button.
Set B in the same way.
When printing restarts for the adjustment
pattern and printing is complete, the
adjustment value entry screen is displayed.
When Textile is selected
Set the value measured in step 9, and then press
the Z button.
When printing restarts for the adjustment
pattern and printing is complete, the
adjustment value entry screen is displayed.
K
Check the printed adjustment pattern.
Model/Status Adjustment Pattern
SC-S40600 Series
In one head mode for
SC-S80600 Series/
SC-S60600 Series
Two blocks for A
and B
*1
In two head mode for
SC-S80600 Series/
SC-S60600 Series
Six blocks for A to
F
*2
*1 In one head mode for 10 color mode in SC-S80600
Series when MS installed, four blocks for A to D.
*2 In two head mode for 10 color mode in SC-S80600
Series when MS installed, 12 blocks for A to L.
Select the finest lined pattern (all lines overlap)
for both. Select "-1" in the cases shown below.
L
The screen for entering values is displayed.
Using the u/d buttons, change the value to the
value recorded in Step 11, and then press the
Z button.
M
When multiple check patterns have been
printed, select the number per check pattern,
and then press the Z button.
Using the u/d buttons, change the value to the
value recorded in Step 11, and then press the
Z button.
When you enter the final setting, the status display
screen is displayed.
Performing Customize Settings after registration
After registration, when performing Media Type or
Advanced Settings in Customize Settings, you need
to perform Media Adjust again.
U “Media Adjust” on page 47
Media Adjust
This menu is used if the following conditions occur
after performing media adjustment.
Even after Auto Media Adjust is performed,
banding or graininess is found in the print results
Select Manual, and then perform Media Adjust -
Standard and Head Alignment.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info