655253
46
Zoom out
Zoom in
Previous page
1/135
Next page
Easy Media Setup Procedure
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the Menu button.
The settings menu will be displayed.
B
Select Media Setup and press the Z button.
C
Use the d or u button to select Easy Media
Setup, and then press the Z button.
D
Use the d/u buttons to select the desired
media number, and press the Z button.
If a number with the saved settings is selected,
the existing settings are overwritten.
E
The setting name is registered.
Name the media setting bank. Using distinctive
names makes it easier to select banks for use.
Use the d/u buttons to display letters and
symbols. When the desired character is
displayed, press the r button to select the next
entry position.
Mistakes can be erased by pressing the l
button to delete the previous character and
move the cursor back one spot.
F
After entering the name, press the Z button.
G
Use the d/u buttons to select the media type
that matches the loaded media, and then press
the Z button.
When Adhesive Vinyl or Banner is selected, go
to step 8.
When you select anything except for Adhesive
Vinyl and Banner, printing starts for the media
adjustment pattern. Go to step 9.
H
Use the d/u buttons to select Auto/Manual for
Media Adjust, and then press the Z button.
When executing Auto: An adjustment pattern
is printed. When auto adjustment is complete,
Easy Media Setup is complete and you are
returned to the status display screen.
When executing Manual: An adjustment
pattern is printed. When printing is complete,
the adjustment value entry screen is displayed.
Continue to the next procedure.
I
Check the printed adjustment pattern.
When anything except for Textile is selected
Two groups of adjustment patterns, A and B,
are printed. Select the pattern with the least
amount of overlapping or gaps for each group.
Select "0.0" in the cases shown below.
If there are patterns where the overlapping or
gaps are the same, enter the middle value in
step 10. Enter "-0.05%" in the cases shown below.
If all of the adjustment patterns contain
overlapping or gaps, select the pattern with the
least overlaps or gaps.
In this situation, follow the steps below to
complete Easy Media Setup, and then perform
500mm Pattern for media feed adjustment.
U “Feed Adjustment” on page 48
When Textile is selected:
A 500 mm pattern is printed.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
46
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson SC-S80600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson SC-S80600 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson SC-S80600

Epson SC-S80600 User Manual - Dutch - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info