749195
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
IP2288EN
EN
13. Outputs and accessories
Output Value of
accessories Description
0
-
1
+
24V / 0.3A
Power supply to accessories
Output for power supply to external accessories.
NB: the maximum absorption of 0.3A corresponds to the sum of all
terminals 1.
GOL148REA
If the ZENPRS radio receiver is used (868.35 MHz), connect the supplied
antenna wire (90mm).
+LP- FLM
FL24
24V / 25W
Flashing light
The pre-ashing settings can be selected from the third level menu
and/or .
To modify the operating mode of the LP output, refer to the selection
.
AUX
SOFA1-SOFA2
GOPAVRS
LAB9
BIXR2
BIXPR2
LAN7S
The control panel has a slot for plug-in command and safety cards.
The action of the control card can be defined by selecting .
When using slot-in radio boards, remove the RDX module. The display
will show .
WARNING: the plug-in board must be inserted and removed with the
power supply disconnected.
12.1 SOFA1-SOFA2 or GOPAVRS self-controlled safety edge
Command Function Description
GOPAV
SOFA1-SOFA2
SAFETY TEST
Insert the SOFA1-SOFA2 or GOPAVRS device in the slot
for plug-in boards AUX1 or AUX2.
If the test fails, an alarm message appears on the
display.
1 6
NC SAFETY STOP
When selecting , connect the output
contact of the safety device to terminals 1-6 on the con-
trol panel (in series with the photocell output contact,
if installed).
1 8
NC CLOSURE
SAFETY DEVICE
When selecting , connect the output
contact of the safety device to terminals 1-8 on the con-
trol panel (in series with the photocell output contact,
if installed).
1 6
8 NC
CLOSING/
OPENING
SAFETY DEVICE
When selecting , connect the output
contact of the safety device to terminals 1-6-8 on the
control panel (in series with the photocell output con-
tact, if installed).
If , and cannot be or .
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec ION6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec ION6 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info