741458

Elkron 80TC1L00133 Manual

67
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 67
4.2.1 Control keypad password and access
The system will wait for the password to be entered after being switched on. The control panel requires a 6-digit
password. The entered digits will be replaced by a “*” symbol on the screen for privacy. Access to the menu is gained
after entering all the digits correctly. Refer to the corresponding manual for using the control panel.
WARNING
THE DEFAULT USER PASSWORD IS “000000”. It is advisable to change the default password to prevent intrusions.
Do not lose or forget the programmed password. Take note of the new password and keep it in a safe place.
4.2.2 Control keypad command syntax
Controls can use the joystick, single keys or key combinations.
The key command syntax is shown below.
Key command syntax
The syntax used in this manual for controls using keys consists of various elements (words and three digit numbers).
Each command is always in braces and each element is separated by commas. Each word or decimal digit used in the
syntax is identified by a corresponding key on the control panel. Words can be enclosed in round brackets, square
brackets or no brackets. Three digit decimals are never enclosed in brackets.
The following words only can be used: PRESET, SHOT, ADDR, ESC, IRIS+, IRIS-, FOCUS +, FOCUS -,
ZOOM -, ZOOM +, ENTER. The decimal digits are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
Some application examples of controls are shown in detail below.
Using the joystick
A command can also be given simply by moving the joystick because this generates actions on the camera or OSD (On
Screen Display) menu.
WARNING:
The joystick also allows to stop an operation during its execution; to do this, move the joystick in any direction to stop the
operation in progress; in this way it is possible to start another one or send a command.
Using a single key
Pressing a single key can cause camera action. For example, the following command will zoom out of the frame.
Underling indicates the key is in use.
ZOOM -
Key combinations
Pressing a key combination in rapid sequence extents the command set. For example, the following command (select
camera address 1) is performed by pressing the following keys:
CAM
+ 1 + ENTER
4.2.3 Control keypad command types
There are four command types.
1. Select camera.
2. Move camera (tilt and pan, zoom, adjust focus and iris opening, go to preset positions).
3. Adjust camera operation mode using menus
4. Various quick controls operable from the control panel
The method for accessing these controls will be shown in detail in the following paragraphs.
4.3 SELECT CAMERA
The camera to be controlled must be selected first. For example, the following command selects camera 1:
CAM + 1 + ENTER
After this operation, the message CAM 1 will appear on the control panel display
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info