741458

Elkron 80TC1L00133 Manual

65
Zoom out
Zoom in
Previous page
1/248
Next page
DS80TC1L-001 65
• Open the inside cover and connect the cables, inserting the male connector of the cable furnished with the Kit
80TH5400133 in the female connector present in the device.
• Close the cover.
• Fit the camera module inside the Kit, paying particular attention to arrangement of the connectors on the
module and on the base of the housing. Make sure that they click in place.
• Fasten the transparent Dome to the part previously inserted in the false ceiling, turning this by round 10 degree
in a clockwise direction.
• Connect the video OUT cable of the camera to the service point used.
• Connect the Red and Black power cable fitted with connection terminals to the power box provided.
• Connect the Yellow and Orange RS485 cable fitted with connection terminals to the control keypad.
• Connect the Yellow/Green cable to the earth terminal.
3.2.7 Installation with corner adapter ref. 80SP2D00133
Install the bracket Ref. 80SP1D00133 or Power Box Ref. 80PS9200133 on the corner adapter Ref. 80SP2D00133.
3.2.8 Installation with pole adapter ref. 80SP3D00133
Install the bracket Ref. 80SP1D00133 or Power Box Ref. 80PS9200133 on the pole adapter Ref. 80SP3D00133.
3.2.9 Connection lead requirements
Three types of leads are required:
1. Video lead for carrying the standard composite video signal to the remote observation position. A 75 Ohm
coaxial cable is normally used.
2. ELKDome camera power lead (24Vac power unit).
3. RS485 lead for distributing commands from the keypad to the ELKDome camera. A twisted, two wire, not
shielded lead is recommended. A 0.64 mm diameter lead is recommended (22AWG).
BLOCKING SCREWS
OPEN THE
COVER TO
CONNECT THE
CABLES
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron 80TC1L00133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron 80TC1L00133 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info