Manual Dremel 400seriesXPR (page 16 of 72) (English, French, Spanish)

25125

Zoom out

Zoom in

1/72

For availability of all accessories and attachments, refer your local hardware, hobby or home

center. Or contact Dremel Consumer Service at:

1-800-437-3635 or at www.Dremel.com.

Use only Dremel™, high-performance accessories. Other accessories are

not designed for this tool and may lead to personal injury or property

damage.

Screw Mandrel

For use with the felt polishing

tip and felt polishing wheels.

Mandrels

A mandrel is a shank with a threaded or

screw head used with polishing accessories,

cutting wheels, sanding discs and polishing

points. The mandrel is a permanent shank,

allowing for replacement of the worn head

when necessary.

Drywall Cutting Bit

When using a template (outlet box) behind

the drywall, cut in a counterclockwise direc-

tion.

ACCESSORIES

Multipurpose Cutting Bit

For use in wood, plastics, drywall, fiberglass,

vinyl or aluminum siding, acoustical tile and

laminates.

Start the bit into the material at a 45° angle

and then slowly bring it to a 90° angle to

begin the cut.

High Speed Router Bits

For routing, inlaying and mortising in wood

and other soft materials. Use only with

Dremel™ Router Attachment #330 or

Shape/Router Table #231.

WARNING

Tile Cutting Bit

For use wall tile, cement board and plaster.

Start the bit into the material at a 45° angle

and then slowly bring it to a 90° angle to

begin the cut.

Small Screw Mandrel

Mandrel has a small screw

at the tip and is used with

emery and fiberglass cutting

wheels, sanding discs and

polishing wheels.

Threaded Tip Mandrel

Mandrel has a threaded tip

which threads into the polish-

ing point accessory #427.

Diamond Wheel Points

Used for fine detail work on

wood, jade, ceramic, glass and

other hard material. Bits are

covered with diamond parti

cles.

Aluminum Oxide Grinding

Stones (red/brown)

These grinding stones

come round, pointed or flat

and are made of aluminum

oxide. Use them for every possible grinding

operation: sharpening lawn mower blades,

screwdriver tips, knives, scissors, chisels and

other cutting tools. Use to remove flash from

metal castings, deburring any kind of metal.

These grinding stones can be resharpened

with a dressing stone. In machine shops,

high speed drills and cutters are normally

ground with aluminum oxide wheels.

Silicon Carbide Grinding

Stones (blue/green)

Tougher than aluminum oxide

points, these are made especially for use on

hard materials such as glass and ceramics.

1/8" shank

3/32" shank

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 400seriesXPR in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dremel 400seriesXPR Manual

Product: