Manual Dremel 400seriesXPR (page 17 of 72) (English, French, Spanish)

25125

Zoom out

Zoom in

1/72

Wire Brushes

Never use wire brushes at

speeds greater than

15,000 rpm. Refer to Speed Settings

(pages 10-12) for proper tool and setting.

Three different shapes

of wire brushes are

available in three differ-

ent materials: stainless

steel, brass and carbon

wire. Stainless steel

brushes perform well on pewter, aluminum,

stainless steel and other metals, without

leaving rust. Brass brushes are non-sparking

and softer than steel, making them good for

use on soft metals like gold, copper and

brass. Carbon wire brushes are good for

general purpose cleaning.

Tungsten Carbide Cutters

Tungsten carbide cutters

are long-lived cutters for

use on hardened steel, fired

ceramics and other very hard materials. They

can be used for engraving on tools and gar-

den equipment.

High Speed Cutters

High speed cutters are

used in carving, cutting

and slotting wood, plastics

and soft metals (such as aluminum, copper

and brass). Made of high quality steel.

Engraving Cutters

Engraving cutters come in a

wide variety of sizes and

shapes and are used for intricate work on

ceramics (greenware), wood carvings, jewel-

ry and scrimshaw. They are often used in

making complicated printed circuit boards.

They should not be used on steel and very

hard materials, but are good for use on

wood, plastic and soft metals.

Structured Tooth Tungsten Carbide Cutters

These cutters feature fast cutting needle-

sharp teeth for greater material removal with

minimum loading. Use on fiberglass, wood,

plastic, epoxy and rubber.

Bristle Brushes

Bristle brushes are

used for cleaning tools on

silverware, jewelry and antiques. The three

shapes make it possible to get into tight cor-

ners and other difficult spaces. They can be

used with polishing compound for faster

cleaning or polishing.

CAUTION

Brushing Pressure

•. The tips of a wire brush do the work.

Operate the brush with the lightest pres-

sure so only the tips of the wires come in

contact with the work surface.

•. If heavier pressure is used, the wires will

become overstressed, resulting in a wip-

ing action. If this continues, the life of the

brush will be shortened by fatigue.

•. Apply the brush to the work surface so

the majority of the brush face makes full

contact. Applying the edge or side of the

brush to the work surface will result in

wire breakage and shortened brush life.

Aluminum Oxide Abrasive

Wheels

Used to remove paint, deburr

metal, polish stainless steel

and other metals. Available in

medium grit.

Grinding Wheel

Used for deburring, removing

rust, and general purpose grind-

ing. Use with Mandrel #402.

ACCESSORIES (continued)

1/8" shank

3/32" shank

1/8" shank

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 400seriesXPR in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dremel 400seriesXPR Manual

Product: