768203
31
Zoom out
Zoom in
Previous page
1/44
Next page
CINEMASCOPE SETUPS
R699890 - Siglos X-tra Series User Manual 31
Select “Menu => Installation => Lens memory 2”
Make sure to project a 16:9 picture, zoom out until the picture top and bottom t the top and bottom of the screen.
Adjust the focus and offset if required, then save this position into the memory 2. You can additionally edit the
memory name to “Standard AR”.
Switch format using the Remote Control Unit.
You can now switch between Cinemascope and standard formats easily by using the Setting Memory buttons on
the RCU and selecting the correct lens memory according to the source format.
Because of the nature of the lens motorization, the precision overtime is not enough to perpetually
maintain the correct zoom / focus / position after several zoom in and out. It is required to periodically
alter the lens setting.
15.3  Installing a 2.35:1 screen with the Static Cinemascope kit
At rst, you must install the screen and the anamorphic lens according to their respective installation instructions.
Video source is 16:9: set [Anamo]rphic to Mode B
When you select a 16:9 input and that you must see all the details on the picture, in particular the top and bottom
parts of the image, then you should choose the anamorphic Mode B. This aspect compress the picture vertically
so it can be fully displayed in a 2.35:1 screen.
“Menu => Installation => Anamorphic => Mode B”
Video source is Cinemascope: set [Anamo]rphic to Mode A
To obtain a Cinemascope picture into a 2.35:1 screen you must select anamorphic Mode A. Select Anamorphic
mode A for this input in the “Menu => Installation => Anamorphic => Mode A”.
[Anamo]rphic modes
OFF Anamo Mode A Anamo Mode B
When you press sequentially the [Anamo]rphic button, you change the mode from OFF, Mode A and Mode B.
Mode A is intended to be used with an anamorphic lens to watch 2.35:1 content on a 2.35:1 screen.
Mode B is intended to be used to watch 16:9 content on a 2.35:1 screen with the Static Cinemascope kit.
Anamo Kit installed
2.35 screen
16:9 on 2.35 screen
2.35 on 2.35 screen Mode A
Mode B
16:9 format
2.35:1 format
When the source switches format....
... press [Anamo] button to obtain the correct anamorphic mode.
Mode A
Mode B
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Siglos X-TRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Siglos X-TRA in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info