768203
30
Zoom out
Zoom in
Previous page
1/44
Next page
R699890 - Siglos X-tra Series User Manual
INFORMATION MENU
30
the code used by the RCU to communicate with the projector from A to B. To do so, press and hold for 3 sec
simultaneously [MENU]+[BACK] buttons on the RCU. All the buttons on the RCU will blink.
Two blinks indicate that the RCU uses code B.
Three blinks indicate that the RCU uses code A.
13.6  Lamp Reset
Resets the lamp use time to “0” during the lamp replacement procedure. See Section “16.3 Replacing the Lamp”,
page 32 for more details.
14.0 INFORMATION MENU
Input Terminal and Input Source
Displays the active video input and the type of the current video input signal.
Resolution and H. and V. Frequency
If the active input is PC input, its resolution, Horizontal and Vertical frequencies are displayed.
Color Depth / Color Space
Displays the color bit depth of the input video signal. N.A. with YCbCr (4:2:2) input.
Colorimetry
Displays the color space and color depth of the input signal. Also detects HDR color encoding like BT.2020.
HDR
Displays if the source uses the HDR encoding or not.
MaxCLL and MaxFALL
When explicitly present in the source meta data container, it displays the levels in nits of the brightest pixel of the
stream (MaxCLL) and the level of the brightest frame of the stream, MaxFALL.
Lamp Time
Displays the accumulated hours of usage of the lamp.
PS Version
Displays the current software version.
Calibrator
Stores up to 18 ASCII characters set by the Calibrator. Shown only if set during ISF prole adjustment.
15.0 CINEMASCOPE SETUPS
15.1  Lens Zoom or Static Cinemascope kit
The Siglos X-tra Series centralizes the controls and automation commands for a unique, versatile and
unexpectedly simple to operate 2.35:1 theatre experience using Lens Zoom or the Static Cinemascope kit.
Up to 10 lens position memories
Integrated Constant Image Width (CIW) scaling algorithm with anamorphic mode A and mode B.
Dedicated commands to control the picture sizes and aspect ratios on a 2.35:1 screen.
15.2  Cinemascope setup with Lens Zoom
Select “Menu => Installation => Lens Memory 1”
Zoom in, until the left and right borders of the picture ts the 2.35:1 screen borders. Save the lens position in the
lens memory 1. You can also edit the memory 1 name to “Cinemascope”.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Siglos X-TRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Siglos X-TRA in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info