598403
13
Zoom out
Zoom in
Previous page
1/100
Next page
13ENGLISH
1. First,alignthetriangularmarksofthemaleplug
oftheconnectioncordwiththetriangularmarkofthe
femaleconnectoroftheswitchbox.Pushintheplugof
theconnectioncordtotheconnectoroftheswitchbox.
Then,alignthemarkingonthecouplingwiththetrian-
glar marks, and push in and turn the coupling to tighten.
Fig.14: 1.Triangularmark 2.Connectioncord
3. Switch box 4. Marking on coupling 5. Coupling
NOTICE:Turnthecouplingandalignthemarking
onthecouplingwiththetriangularmarksrstwhen
disconnecting the connection cable.
2. Hang the switch box on the waist belt or upper
belt.
Fig.15
3. Pushtheconnectioncordintotheloopofthecord
holder.
Fig.16
Hang the cord holder on either the upper belt or the
waist belt on which the switch box is not hung.
Thecordholderpreventstheconnectioncordfromdan-
gling around your body, and also the cord holder can
preventtheconnectioncordfrombeingcutbymistake.
Fig.17
Fig.18
NOTICE: Do not hang anything other than the
connection code on the cord holder. Otherwise the
code holder may be broken.
NOTICE: Do not force the cord holder opening.
Otherwiseitmayresultindeformationorbreakageof
the code holder.
4. Put the arm band on your arm. And slip the con-
nection cord through the arm band.
Fig.19: 1. Arm band
5. First,alignthetriangularmarksofthefemale
socketoftheconnectioncordwiththetriangularmark
ofthemaleconnectoroftheshears.Pushinthesocket
oftheconnectioncordtotheconnectoroftheshears.
Then,alignthemarkingonthecouplingwiththetrian-
glar marks, and push in and turn the coupling to tighten.
Fig.20: 1.Triangularmark 2.Connectioncord
3. Shears 4. Marking on coupling 5. Coupling
NOTICE:Turnthecouplingandalignthemarking
onthecouplingwiththetriangularmarksrstwhen
disconnecting the connection cable.
Putting shears in the holster
Keep pulling the switch trigger to close the shear
blades,andpresstheI/Oswitchto"O"sidetoturnoff
thetool.Thenputtheshearsintotheholsterandhold
theshearswiththestrapoftheholster.
OPERATION
CAUTION: Always hold the tool rmly. And
keep rm footing.
CAUTION: Do not put any of your body parts
near to the blades during operation.
CAUTION: Before use, inspect if the blades,
blade bolts or other parts are not worn or dam-
aged.Replacewornordamagedpartsforsafe
operation.
NOTICE:Ifthebladeisstuckinabranchduring
operation, do not twitst the blade. In that situation,
turnoffthetoolandpullthebladesstraightout
slowlyfromthebranch.Otherwisetheblademaybe
damaged.
NOTICE: In case you cut too thick branch or some-
thing too hard, the overload protection works and the
toolstops.Inthatsituation,iftheuppershearbladeis
openedtoowideandtheswitchtriggerispulledfully,
the upper blade closes slightly when you press the
I/Oswitchto“I"(on)positionforrestartingthetool.
Pruning operation
Fig.21
Cutbranchesonebyone.Themaximumthicknessof
branches which can be cut with these shears is about
33mm.Maintainyourproperfootingandbalanceatall
times.
After use
Closetheshearblades,presstheI/Oswitchtothe“O"
(off)position,anddisconnecttheconnectioncordfrom
the shears and the switch box, and remove the batteries
frombatteryholder.
Storetheshearsindry,highorlocked-upplace–outof
reachofchildren.
NOTICE: Remove the battery when not using the
shears. Otherwise the battery capacity is reduced
duringcourseoftime.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
CAUTION: Wear safety gloves when handling
the blade.Otherwiseitmayresultinpersonalinjury.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar AR-3733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar AR-3733 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 17,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info