652870

Dittmann TGS 440 Radio Tens Device Manual

18
Zoom out
Zoom in
Previous page
1/29
Next page
PLEASE NOTE: If the green LED on a TENS stimulator does no longer flash during the
therapy session, please check if the adhesive electrode pad has full contact with the skin.
PLEASE NOTE:
During operation, the green LEDs of the TENS stimulators flash slowly; however, every
time one of the (+) or (-) keys of the remote control is pressed, they flash rapidly. Rapid
flashing indicates that the device receives a control pulse from the remote control. Every
time a key is pressed on the remote control, the green remote control LED flashes in
addition to this. If you press one of the (+) keys on one of the TENS stimulators during
the therapy session, the output intensity is increased by one level. If you press one of
the (-) keys on one of the TENS stimulators during the therapy session, the output
intensity is reduced by one level. Every time one of the (+) or (-) keys on one of the
TENS stimulators A or B are pressed, the green LEDs of the TENS stimulators flash
slowly.
Setting the output intensity of the TENS stimulators
In order to increase the output intensity, the (+) keys on the TENS stimulators as well
as the (+) keys on the remote control are used, where the output intensity of the TENS
stimulators can be increased individually using the A (+) or B (+) keys or
simultaneously using the A/B (+) key.
In order to reduce the output intensity, the (-) keys on the TENS stimulators as well as
the (-) keys on the remote control are used, where the output intensity of the TENS
stimulators can be reduced individually using the A (-) or B (-) keys or simultaneously
using the A/B (-) key.
Functions of the green LEDs of the TENS stimulators
LED lights up: Standby mode / The device is ready for operation
LED flashes: Operating mode / The adhesive electrodes have
been applied and the device is in operation
LED flashes quickly: Receive mode / The device receives the pulses
from the remote control
LED out: "OFF" mode / The device has been switched off
9.0 Functions of the radio TENS device
COMMISSIONING
18
GB
Switching off the TENS stimulators
2. Press the ON/OFF key on the remote control. The green LED of the remote control
flashes and the TENS stimulators are switched off immediately.
1. In the standby mode (green LED lights up constantly), you can switch off the TENS
stimulators by pressing the (-) key on the TENS stimulator.
The permanently set application time is 30 minutes. The TENS stimulators are switched
off automatically after this time has expired. However, you can also switch off the TENS
stimulators manually at any time as follows:
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TGS 440 Radio Tens Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TGS 440 Radio Tens Device in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info