652870

Dittmann TGS 440 Radio Tens Device Manual

17
Zoom out
Zoom in
Previous page
1/29
Next page
17
Figure 12
Figure 13
Figure 14
Figure 17
Figure 15
Figure 16
Step 8
The programme sequence and the application time of 30
minutes are permanently set and cannot be changed. After
the application time has expired, the TENS stimulators are
switched off automatically and the green LEDs go out. If you
wish to stop the therapy session before the application time
has expired, you can press the ON/OFF key on the remote
control. The current therapy session is then stopped
immediately and the TENS stimulators are switched off.
Afterwards, carefully remove the adhesive electrode pads from
the skin. To this end, lift the adhesive electrode pad in the area
of the arrow with the "PULL" imprint and remove it carefully
from the skin. Please make sure that you do not touch the
adhesive surfaces with your fingers. Afterwards, stick the
adhesive electrode pads back onto the protective foil and store
them in a suitable place under cool and dry conditions.
Attention! Never remove the adhesive electrode pads from
the skin while the device is still switched on!
Step 7
Increase the output intensity by pressing the A (+) or B (+)
keys on the remote control (see Figure 14) or on the TENS
stimulator A or B (see Figure 15) according to your individual
needs. Every time you press one of the (+) keys, the output
intensity of the respective TENS stimulator is increased by one
level. If both TENS stimulators are used, you can increase the
intensity setting for both TENS stimulators A and B
simultaneously (both at the same time) by pressing the A/B
(+) key on the remote control.
By using the A (-) or B (-) keys on the remote control (see
Figure 16) or on the TENS stimulator A or B (see Figure 17),
you can reduce the intensity of the TENS stimulators. Every
time you press one of the (-) keys, the output intensity of the
respective TENS stimulator is reduced by one level. If both
TENS stimulators are used, you can reduce the intensity setting
for both TENS stimulators A and B simultaneously (both at the
same time) by pressing the A/B (-) key on the remote control.
Step 6
Now, press the ON/OFF key on the remote control first in
order to switch it on (see Figure 12). The green LED flashes
briefly for confirmation and goes out again. Now, switch on the
TENS stimulator A or B (or both TENS stimulators) by pressing
once on the (+) key of the respective TENS stimulator. The
green LED on the TENS stimulator lights up (see Figure 13).
9.0 Commissioning of the radio TENS device
COMMISSIONING / USAGE
GB
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TGS 440 Radio Tens Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TGS 440 Radio Tens Device in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info