652870
19
Zoom out
Zoom in
Previous page
1/29
Next page
4.4.1
4.4.2
19
PLEASE NOTE: If the green LED on a TENS stimulator does no longer flash during the
therapy session, please check if the adhesive electrode pad has full contact with the skin.
However, switching on and off as well as increasing and reducing the output
intensity can also be carried out by directly pressing the (+) and (-) keys on the
TENS stimulators (channel 1 = TENS stimulator A, channel 2 = TENS
stimulator B).
The radio TENS device TGS 440 can be controlled comfortably using the remote
control included in the scope of delivery. Using this remote control, the output
intensity of the TENS stimulators A and B can be increased and reduced both
separately (individually) and simultaneously (both at the same time) and the
stimulators can also be switched off by pressing a single key.
10.0 Remote control
PLEASE NOTE:
There are 20 output intensity levels for the TENS stimulators. Every time one of the (+)
keys on the remote control or on one of the TENS stimulators is pressed the output
intensity is increased by one level. For safety reasons, a fast forward by pressing the key
and keeping it pressed is not possible; thus, increasing the output intensity too fast can
be avoided. If you increase the output intensity on one of the (+) keys on the remote
control, the increase by one level is indicated with the green LEDs on the TENS
stimulators flashing fast. If this fast flashing of the LEDs of the TENS stimulators no
longer occurs despite pressing one of the (+) keys on the remote control, the highest
output intensity has already been reached.
Every time one of the (-) keys on the remote control or on one of the TENS stimulators
is pressed the output intensity is reduced by one level. A fast rewind by pressing the key
and keeping it pressed is not possible. If you reduce the output intensity on one of the
(-) keys on the remote control, the reduction by one level is indicated with the green
LEDs on the TENS stimulators flashing fast. If this fast flashing of the LEDs of the TENS
stimulators no longer occurs despite pressing one of the (-) keys on the remote control
and the LEDs light up constantly, the lowest output intensity has already been reached. If
you then press the (-) key on one of the TENS stimulators, this TENS stimulator is
switched off and the green LED goes out.
9.0 Commissioning of the radio TENS device
QUICK OVERVIEW
GB
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TGS 440 Radio Tens Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TGS 440 Radio Tens Device in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info