Manual DeWalt DCMW564 (page 42 of 184) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

712289

Zoom out

Zoom in

1/184

ENGLISH

remove batteries before lifting, transporting, or storing the

mower. Store in a dryplace.



CAUTION: Pinch point. To avoid being pinched, keep

fingers away from area around handle brackets when

folding downhandles.



CAUTION: Make sure cord does not become stretched

or pinched in the area between the handle and handle

bracket during folding. This can cause damage to thecord.

The handle of the mower can be easily folded down for quick

and convenientstorage.

1. To unlock the handle

4

, pull and twist a half turn the two

handle locks

6

located on both sides of the handle.

2. Fold the handle to the front of the mower as shown in

Fig.M.

3. Locate the handle storage detent holes

8

located on the

handle brackets

7

as shown in Fig. M.

4. Lock the handle in place by untwisting the handle locks

6

allowing them to snap into the storage detent holes and

ensure the handle is firmlylatched as shown in Fig. M.

Carrying the Mower (Fig. A, N)



DANGER: Rotating blades can cause serious injury.

To prevent serious injury, remove safety key and

battery packs when unattended, or when charging,

cleaning, servicing, transporting, lifting, or

storingmower.

• The mower can be carried using the convenient carry

handles

14

15

as shown in Fig. N. DO NOT attempt to lift

the mower by grasping the main handle

4

Mowing Tips



WARNING: ALWAYS INSPECT AREA WHERE MOWER

IS TO BE USED AND REMOVE ALL STONES, STICKS,

WIRE, BONES, AND OTHER DEBRIS WHICH MIGHT BE

THROWN BY THE ROTATINGBLADE.



WARNING: Mow across the face of slopes, never up-and-

down. Exercise extreme caution when changing direction

on slopes. Do not mow excessively steep slopes. Always

maintain goodfooting.

1. Release bail handle to turn mower “OFF” when crossing any

gravel area (stones can be thrown by the blade).

2. Set mower at highest cutting height when mowing in

rough ground or in tall weeds. Removing too much grass at

one time can cause the motor to be overloaded and to stop.

Refer to TroubleshootingSection.

3. If a grass collection bag

12

is used during the fast growing

season, the grass may tend to clog up at the discharge

opening. Release bail handle to turn mower off, remove

the safety key and battery packs. Remove the catcher and

shake the grass down to the back end of the bag. Also clean

out any grass or debris which may be packed around the

discharge opening. Replace the grasscatcher.

4. If mower should start to vibrate abnormally, release bail

handle to turn mower off, remove the safety key and battery

packs. Check immediately for cause. Vibration is a warning

of trouble. Do not operate mower until a service check

has been made. Refer to troubleshooting section inthis

manual.

5. For best cutting results, keep blade sharpened

andbalanced.

6. Inspect and thoroughly clean mower after each use as a

deck with caked grass will degrade performance.

7. ALWAYS RELEASE BAIL HANDLE TO TURN MOWER

OFF, REMOVE SAFETY KEY AND BATTERY PACKS WHEN

LEAVING IT UNATTENDED EVEN FOR A SHORT PERIOD

OFTIME.

The following suggestions will help you

to obtain optimum run time from your

cordless mower:

• Slow down in areas where the grass is especially long

orthick.

• Avoid mowing when the grass is wet from rain or

dewsoaked.

• Cut your lawn frequently, especially during high

growthperiods.

NOTE: It is recommended that your mower be recharged

after use to prolong the battery life. Frequent charging

will not harm your battery, and will ensure that the

battery is fully charged and ready for its next use. Storing

battery not fully charged will shorten batterylife.

MAINTENANCE



DANGER: To reduce the risk of serious personal

injury, turn unit off, remove safety key, and remove

battery packs before making any adjustments or

removing/installing attachments or accessories. An

accidental start-up can causeinjury.

Removing and Installing Blade (Fig. O – Q)



DANGER: RISK OF INJURY. WHEN REASSEMBLING THE

BLADE SYSTEM, ENSURE EACH PART IS REINSTALLED

CORRECTLY, AS DESCRIBED BELOW. IMPROPER ASSEMBLY

OF THE BLADE OR OTHER PARTS OF THE BLADE SYSTEM

MAY CAUSE SERIOUSINJURY.



DANGER: To reduce the risk of serious personal

injury, turn unit off, remove safety key, and remove

battery packs before making any adjustments or

removing/installing attachments or accessories. An

accidental start-up can causeinjury.

1. Cut a piece of 2x4 wood

24

(about 610mm long) to keep

blade from turning when removing the flange nut 

25



WARNING: Use gloves and proper eye protection. Turn the

mower on its side. Be careful of sharp edges of blade.

2. Position wood and unscrew flange nut 

25

counterclockwise with a 18 mm wrench

26

as shown in

Fig.O.

3. Remove square metal blade spacer 

27

, square plastic

blade insulator 

28

and blade 

29

as shown in Fig. P. The

blade fan

30

should not be removed. Examine all pieces for

damage and replace ifnecessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCMW564 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 21,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCMW564 Manual

Product: