Manual DeWalt DCE080GS (page 24 of 232) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

790944

Zoom out

Zoom in

1/232

GB Accessories

Recommended accessories for use with your tool are available for

purchase at your factory-owned local service center.

WARNING:

Since accessories other than those offered by DEWALT

have not been tested with this laser, use of such

accessories with this laser could be hazardous. To reduce

the risk of injury, only use DEWALT® accessories that are

recommended for use with this rotary laser.

If you need assistance in locating any accessory, please visit our

website www.2helpU.com

Mounting Bracket

Some laser kits include a mounting bracket, which can be used for

attaching the tool to a track or to a ceiling grid to aid in acoustical

ceiling installation. Follow the directions below for using the mounting

bracket.

CAUTION:

Before attaching the laser level to wall track or ceiling

angle, be sure that the track or angle is properly

secured.

1. Place the laser on the mounting base (Figure P 5) aligning the

5/8–11 screw hole on the tripod adapter (Figure G 1), attached

to the bottom of the laser with the hole (Figure P 6) in the

mounting base.

2. Turn the mounting knob (Figure P 3) to secure the laser.

3. With the bracket's measuring scale (Figure P 7) facing you,

loosen the clamp locking knob (Figure P 8) to open the clamp

jaws.

4. Position the clamp jaws around the wall track or ceiling angle

and tighten the clamp locking knob (Figure P 8) to close the

clamp jaws onto the track. Be sure that the clamp locking knob

is securely tightened before proceeding.

CAUTION:

Always use a ceiling wire hanger or equivalent material,

in addition to the clamp locking knob, to help secure

the laser level while mounting it to a wall. Thread the

wire through the handle of the laser level. DO NOT

thread the wire through the protective metal cage.

Additionally, screws may be used to fasten the bracket

directly to the wall as a backup. Screw holes

(Figure P 9) are located at the top of the bracket.

5. Using the base leveling knob (Figure P 2) approximate a level

position from the wall.

6. The tool can be adjusted up and down to the desired height for

working. While supporting the mounting base, loosen the locking

knob on the left side of the bracket (Figure P 1).

7. Turn the adjustment knob on the right side of the bracket (Figure

P 4) to move the laser level up and down to set your height.

Use the measuring scale (Figure P 7) to pinpoint your mark.

NOTE: It may be helpful to turn the power on and turn the

rotary head so that it puts a dot on one of the laser scales. The

DEWALT target card is marked at 1–1/2" (38 mm), so it may be

easiest to set the offset of the laser to 1–1/2" (38 mm) below

the track.

8. Once you have positioned the laser at the desired height, tighten

the locking knob (Figure P 1) to maintain this position.

Construction Grade Rod

DANGER:

NEVER attempt to use a grade rod in a storm or near

overhanging electric wires. Death or serious personal injury

will occur.

Some laser kits include a grade rod. The DeWALT Grade Rod is

marked with measurement scales on both sides and is constructed in

telescoping sections. A spring-loaded button actuates a lock to hold

the grade rod at various lengths.

The front of the grade rod has the measurement scale starting at the

bottom. Use this for measuring from the ground up when grading or

leveling jobs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE080GS in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 23.25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCE080GS Manual

Product: