790944

DeWalt DCE080GS Manual

22
Zoom out
Zoom in
Previous page
1/232
Next page
22
GB 3. Pair the DEWALT® Tool Connect™ application to the laser via a
Bluetooth® connection.
First Time Pairing Paired Before
1. On the DEWALT® Tool
Connect™ application, click .
2. In the list of DEWALT product
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth® connection turns on
(blue LED starts blinking).
5. When the application lists
the laser’s model number as IN
RANGE, select it.
On the laser keypad,
press to turn on the
Bluetooth® connection.
NOTE:
If the Bluetooth® connection does not turn on, replace the 18V
battery.
4. On the DEWALT® Tool Connect™ application, select the
DCE080LRS/LGS rotary laser.
5. The DEWALT® Tool Connect™ application will display information
about the laser on the Diagnostics screen:
• If the current settings are one of the “favorite settings” you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
6. Select ACTIONS.
• If you are using more than one rotary laser and need to check
which laser is paired with the application, press the Identify
button at the bottom of the screen. On the paired laser, the
blue LED next to will blink.
• If you need to, you can enable, disable, or unpair the laser.
7. Select Rotary Control to change the setting for the rotary laser.
• When is selected, choose the rotation speed (150, 300,
600, or 1200).
• Select
15˚/45˚/90˚
and choose the rotation angle (0, 15, 45, 90, or
360) and the rotation direction ( or ).
• Select and choose the Slope Setting, Axis Setting (X or
Y), Slope Configuration (% or degree), # degree or %.
8. Use your cell phone to control the laser.
9. When you are ready, turn the laser off from the Diagnostic screen.
Controlling the Laser from up to 335m Away
You can use Bluetooth® capability to pair the Detector DW0743DR (Red
laser) or DW0743DG (Green laser) with the DEWALT® Tool Connect™
application on your cell phone, and then use your cell phone to control
the laser (Figure J 3).
1. From either or , download the DEWALT®
Tool Connect™ application to your cell phone.
2. On the laser keypad, press to turn the laser on.
3. On the laser keypad, see if the blue LED next to is lit. If the
blue LED is already lit, the laser is probably already paired with
another smart device. You will need to unpair the laser from
the other device before you can pair it to the DEWALT® Tool
Connect™ application.
4. Pair the DEWALT® Tool Connect™ application to the laser via a
Bluetooth® connection.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCE080GS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE080GS in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 23.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info