790944
23
Zoom out
Zoom in
Previous page
1/232
Next page
23
GB
First Time Pairing Paired Before
1. On the DEWALT® Tool
Connect™ application, click .
2. In the list of DEWALT product
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth® connection turns on
(blue LED starts blinking).
5. When the application lists
the laser’s model number as IN
RANGE, select it.
On the laser keypad,
press to turn on the
Bluetooth® connection. The
blue LED will illuminate.
NOTE:
If the Bluetooth® connection does not turn on, replace the DEWALT
18V battery.
5. On the laser keypad, press (Figure A 6) to turn on the
connection to the detector.
6. On the DEWALT® Tool Connect™ application, press Add a detector.
7. Enter a Name for the detector and press Connect.
8. Turn on the detector and then press to turn on the Bluetooth®
connection.
9. The DEWALT® Tool Connect™ application will display information
about the laser on the Diagnostics screen:
If the current settings are one of the “favorite settings” you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1).
If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
10. Select ACTIONS.
If you are using more than one rotary laser and need to check
which laser is paired with the application, press the Identify
button at the bottom of the screen. On the paired laser, the
blue LED next to will blink.
If you need to, you can enable, disable, or unpair the laser.
11. Select Rotary Control to change the setting for the rotary laser.
When is selected, choose the rotation speed (150, 300,
600, or 1200).
Select
15˚/45˚/90˚
and choose the rotation angle (0, 15, 45, 90, or
360) and the rotation direction ( or ).
Select and choose the Slope Setting, Axis Setting (X or Y),
Slope Configuration (% or degree), # degree or %.
12. Use your cell phone to control the laser.
13. When you are ready, turn the laser off from the Diagnostic screen.
Unpairing the Detector from the Application
To unpair the Detector connection to the DEWALT® Tool Connect™
application and return to pairing the application with the laser unit, follow
these steps.
1. On the DEWALT® Tool Connect™ application, unpair the detector
connection on the Diagnostics screen.
2. Turn off the detector.
3. On the laser keypad, press (Figure A 6) to turn off the
connection with the detector. Once the detector is unpaired from the
laser, the laser will automatically switch back to being paired with the
DEWALT® Tool Connect™ application.
4 You can then make sure that the laser unit is paired with the
application. On the ACTIONS screen, select the Identify button at
the bottom of the screen. The blue LED will flash on the paired laser
unit.
5 Then, if you want to unpair the laser unit from the DEWALT® Tool
Connect™ application, you can unpair it from the Actions screen.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DCE080GS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE080GS in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 23.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info