770033

DeLonghi ESAM420.40 - Perfecta Evo Manual

13
Zoom out
Zoom in
Previous page
1/19
Next page
18
2 L
4140
8. Remove, empty and replace the drip tray (A22) and
grounds container (A23). Press ;
9. Place an empty container with a recommended capacity
of 2 litres under the hot water spout (E) and coee spouts
(A16) (g. 41). Press ;
Important! Danger of scalding
Hot water containing acid ows out of the coee spouts and
hot water spout. Take care to avoid contact with splashes of this
solution.
10. The descale programme starts and the descaler liquid
comes out of the hot water and coee spouts. A series of
rinses and pauses is performed automatically to remove all
the scale residues inside the coee machine;
After about 25 minutes, descaling stops;
11. The appliance is now ready for rinsing through with clean
water. Empty the container used to collect the descaler
solution. Extract the water tank, empty, rinse under run-
ning water, ll with fresh water up to the MAX level and
put back in the appliance. Press ;
12. Place the container used to collect the descaler solution
empty under the coee spouts and hot water spout (g.
41) and press ;
13. Conrm by pressing ;
14. Hot water is delivered rst from the coee spouts, then
from the hot water spout;
15. When the water in the tank has run out, empty the con-
tainer used to collect the rinsing water;
16. Extract the water tank and ll with fresh water up to the
MAX level. Press ;
17. (If the lter was installed) Put the water softener lter (if
previously removed) back in its housing in the water tank
(A13), and replace the tank in the appliance, then press
;
18. Place the container used to collect the descaler solution
empty under the hot water spout. Press ;
19. "Rinsing Conrm?": press ;
20. "Rinsing underway". Hot water comes out of the hot water
spout;
21. When descaling is complete, press ;
22. "Empty drip tray": At the end of the second rinse, remove,
empty and replace the drip tray (A22) and grounds con-
tainer (A23). Press ;
23. Empty the container used to collect the rinse water, re-
move the water tank and ll with fresh water up to the
MAX level, then put back in the appliance.
The descaling cycle is now complete.
Please note:
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A23) to contain water;
• If the water tank has not been lled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been complete-
ly eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray.
14. SETTING WATER HARDNESS
The descaling request is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness level of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
14.1 Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)
from its pack (attached to the English instructions);
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
1 level;
soft water (level 1)
hard water (level 3)
very hard water (level 4)
slightly hard water (level 2)
14.2 Setting water hardness
1. Press (B2) to enter the menu;
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM420.40 - Perfecta Evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM420.40 - Perfecta Evo in the language / languages: English as an attachment in your email.

The manual is 13.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM420.40 - Perfecta Evo

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Dutch - 21 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - French - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Italian - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Spanish - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info