481718
55
Zoom out
Zoom in
Previous page
1/76
Next page
54
De Dietrich Gas 310/610 ECO
Code Description Setting Range Factory setting

Minimum fan speed (hundreds)
see section 13.2.1
 -  x 100 rpm
310/610-5 = 15 = 1500 rpm
310/610-6 = 16 = 1600 rpm
310/610-7 = 11 = 1100 rpm
310/610-8 = 11 = 1100 rpm
310/610-9 = 12 = 1200 rpm

Minimum fan speed (units) see section 13.2.1
 -  x 1 rpm

Maximum fan speed (hundreds)
see section 13.2.2
 -  x 100 rpm
310/610-5 = 5500 rpm
310/610-6 = 5600 rpm
310/610-7 = 3650 rpm
310/610-8 = 4200 rpm
310/610-9 = 4500 rpm

Maximum fan speed (units) see section 13.2.2
 -  x 1 rpm

Forced part load running time, see section 13.2.3
 -  x 10 sec. 

Cycling prevention delay-time, see section 13.2.4
 -  x 10 sec.  = 20 seconds

Required flow temperature at 0 volts (analog signal), see
section 13.2.5
 -  = -58 to 122°
F or
 -  = -50°C to 50°C


Required flow temperature at 10 volts (analog signal), see
section 13.2.6
 - , , ,  = 122 to 480°F or

-

= 50°C to 249°C
 = 212°F or  = 100°C

Switch point High/Low operation signal, see section 13.2.6
 -  x 100 rpm
310/610-5 = 3500 rpm
a) Signal "Low fire" if value less than
310/610-6 = 3900 rpm
310/610-7 = 2500 rpm
b) Signal "High fire" if value is greater than
310/610-8 = 2700 rpm
310/610-9 = 3500 rpm

Shunt pump post purge time, see section 13.2.7
 = 1 seconds  = minutes. 
= continuous


ΔT from control stop point start point, see section 13.2.10
-  = 9 54°F 
-

= 5 - 30°C
 = 50 of or  = 10°C

Maximum flue gas temperature, see section 13.2.9
 -  = 176 to 248°F
or

-

= 80 to 120°C
 = 248 of or  = 120°C

High limit temperature set point, see section 13.2.10
 -  = 194 to 212°F or
 -  = 90 to 100°C
 = 212 of or
 = 100°C

Modulation start point ΔT, see section 13.2.11
-  = 9 to 54°F or
 -  = 5 to 30°C
 = 45 of or  = 25°C

Minimum water pressure, see section 13.2.12
 -  = x 0.1 bar units or x 14.5 psi units  = 0.8 bar or 11.6 psi

Adjustments options/accessories, see section 13.2.13
 -  

"Low" fan speed with H/L control parameter =21, see
section 13.2.14
 -  = x 100
310/610-5 = 1500 rpm
310/610-6 = 1600 rpm
310/610-7 = 1100 rpm
310/610-8 = 1100 rpm
310/610-9 = 1200 rpm

Boiler type; Appears only after replacing the control unit

-

depends on output variant
Table 16 Service level setting mod
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich Gas 610 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich Gas 610 ECO in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info