768279
14
Zoom out
Zoom in
Previous page
1/128
Next page
26 27
DEENIT
Make sure that the support leg (7) is xed in the forward
position. Push the adjustment button (13) upwards on the
support leg and press it to pull the support leg (7) until it
touches the vehicle oor. After this, pull the foot out to the
next locking position to ensure optimal force transmission.
The support leg indicator (14) on the base will show
GREEN and a characteristic ‚CLICK‘ may be heard.
Unlock the ISOFIX connectors (8) by pressing and
pulling back the red release buttons (12).
Pull out the base from the ISOFIX anchorage points.
Fold back the ISOFIX connectors (8) in it’s starting
position by turning it back by 180°.
Push the button on the support leg (7) and push it back
into its original position.
Fold back the support leg.
Perform the installation procedure in reverse order.
ADJUSTING THE SUPPORT LEG
REMOVING THE CAR SEAT FROM THE VEHICLE
NOTE! Make sure that the car seat still rests at on the
car seat.
!WARNING! The support leg must always have
direct contact with the ground. It is not allowed to
place objects under the support leg. For information
on the storage compartments in the foot area please
contact your vehicle manufacturer.
Assicurarsi che il piede di supporto (7) sia ssato nel
senso di marcia. Spingere verso l'alto il pulsante di
regolazione (13) del piede di supporto e premerlo per
tirare il piede di supporto (7) nché non tocca il pavimento
del veicolo. Dopo di che, estrarre il piede no alla
posizione di bloccaggio successiva per assicurare una
trasmissione ottimale della forza. L'indicatore del piede di
supporto (14) sulla base sarà VERDE e sarà udibile un
tipico CLIC.
Sbloccare i connettori ISOFIX (8) premendo e tirando
indietro i pulsanti di rilascio rossi (12).
Estrarre la base dai punti di ancoraggio ISOFIX.
Far rientrare i connettori ISOFIX (8) nella loro posizione
originaria.
Premere il pulsante sul piede di supporto (7) e
respingerlo all'indietro nella sua posizione originaria.
Far rientrare il piede di supporto.
Eseguire i passi della procedura di montaggio nella
sequenza inversa.
REGOLAZIONE DEL PIEDE DI SUPPORTO
SMONTAGGIO DEL SEGGIOLINO AUTO DAL VEICOLO
NOTA! Assicurarsi che il seggiolino auto sia ancora in
posizione piana rispetto al sedile del veicolo.
!AVVERTIMENTO! Il piede di supporto deve
essere sempre a diretto contatto con il pavimento.
Non è consentito disporre oggetti al di sotto del
piede di supporto. Per informazioni sugli scomparti
portaoggetti eventualmente presenti nel vano piedi
rivolgersi alla casa automobilistica produttrice.
7 13
12
8
14
Vergewissern Sie sich, dass der Stützfuß (7) in der
vordersten Position eingerastet ist. Schieben Sie die
Verstelltaste (13) am Stützfuß nach oben und halten Sie
diese gedrückt um den Stützfuß auszuziehen. Ziehen Sie den
Stützfuß (7) soweit heraus, bis dieser den Fahrzeugboden
berührt. Ziehen Sie den Stützfuß zur nächsten Verrastung
aus, um eine optimale Kraftaufnahme zu gewährleisten. Der
Stützfußindikator (14) an der Basis schaltet dann auf GRÜN
um, dabei ist ein charakteristisches Klicken zu hören.
Entriegeln Sie die ISOFIX-Konnektoren (8), indem
Sie die roten Entriegelungstasten (12) drücken und
gleichzeitig zurückziehen.
Ziehen Sie den Sitz aus den ISOFIX-Befestigungspunkten
heraus.
Bringen Sie die ISOFIX-Konnektoren (8) in Ihre
Ausgangsposition.
Drücken Sie die Taste am Stützfuß (7) und schieben
Sie diesen in die Ausgangsposition.
Klappen Sie den Stützfuß zurück unter den Sitz.
Führen Sie die Einbauschritte in umgekehrter
Reihenfolge durch.
EINSTELLEN DES STÜTZFUSSES
AUSBAU DES KINDERSITZES AUS DEM FAHRZEUG
HINWEIS! Achten Sie darauf, dass der Kindersitz
weiterhin ächig auf dem Fahrzeugsitz auiegt.
!WARNUNG! Der Stützfuß muss immer direkten
Bodenkontakt haben. Es dürfen keine Gegenstände
untergelegt werden. Bei Staufächern im Fußraum
wenden Sie sich unbedingt an den Fahrzeughersteller.
CLICK!
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex Sirona Q iSize at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex Sirona Q iSize in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 14,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info