818974
13
Zoom out
Zoom in
Previous page
1/340
Next page
Error Code Description Solution
V18 Battery compartment (PMU) failure Check that the accelerator cables are connected properly
and restart the power supply.
V22 blade signal abnormal Check that the blade start switch is connected properly, and
then return the switch to its initial position.
V21 PMU CAN communication error Communication with the battery compartment timed out. Re-
start the power supply.
V23 Operator presence switch abnormal Check that the connector under the seat is connected prop-
erly, and then restart the power supply.
ML3 Left blade software overcurrent Check the mowing load and restart the power supply.
ML4 Left blade stalled Check the mowing load and return the blade start switch to
its initial position.
ML6 Left blade MOS error If you encounter this issue, contact your distributor for a
solution.
ML7 Left blade motor phase loss Check that the blade controller and motor cables are con-
nected properly, and then restart the power supply.
ML9 Left blade controller temperature
abnormal
The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply
ML14 Left blade hardware overcurrent Check the mowing load and restart the power supply.
ML15 Left blade failed to start Check the mowing load and return the blade start switch to
its initial position.
MR3 Motor lowspeed protection Check the mowing load and restart the power supply.
MR4 Motor overspeed protection Check the mowing load and return the blade start switch to
its initial position.
MR6 Motor Hall-sensor error If you encounter this issue, contact your distributor for a
solution.
MR7 Controller phase loss Check that the blade controller and motor cables are con-
nected properly, and then restart the power supply.
MR9 MOSFET open circuit error The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
MR14 Controller undervoltage Check the mowing load and restart the power supply.
MR15 Controller overvoltage Check the mowing load and return the blade start switch to
its initial position.
PMU10 Battery pack open circuit error The temperature of the battery compartment and battery is
too low. Use the machine at a suitable temperature and
restart the power supply.
PMU11 PMU major error The temperature of the battery compartment and battery is
too high. Wait for the battery to cool down, and then restart
the power supply.
PMU12 PMU secondary error A major error in the battery compartment prevented the
drive and blade systems from starting. Restart the power
supply and try again.
PMU13 No battery pack available Check that you are using the correct battery pack, and then
restart the power supply.
PMU Insufficient battery packs available,
functionality may be limited.
Please insert more battery packs.
13
English EN
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82LT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82LT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info