818974
12
Zoom out
Zoom in
Previous page
1/340
Next page
6.1 ERROR CODE
Error Code Description Solution
T11 Overvoltage The voltage is too high. Restart the power supply.
T12 Undervoltage The voltage is too low. Charge the battery pack before use.
T13 Controller self-test error If you encounter this issue, contact your distributor for a
solution.
T14 Drive motor stalled Check if the drive wheels are stuck and restart the power
supply.
T15 Motor encoder error Check that the Hall-effect connector of Drive controller is
properly connected, and then restart the power supply.
T16 Controller driver circuit error If you encounter this issue, contact your distributor for a
solution.
T17 Drive part of controller overtemp The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
T18 Drive motor overheat The motor temperature is too high. Wait for the motor to cool
down, and then restart the power supply.
T21 Temperature sensor of the drive
motor abnormal
Check the wiring of the temperature sensor for abnormali-
ties.
T22 Drive part of controller hardware
overcurrent
The load is too high. Restart the power supply.
T23 Pre-charge error Restart the power supply.
T25 Drive software overcurrent The load is too high. Restart the power supply.
T26 Drive MOS error If you encounter this issue, contact your distributor for a
solution.
T27 Motor phase loss Check that motor cables of the Drive controller are connec-
ted properly, and then restart the power supply.
T28 Drive controller overtemp The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
V14 Reverse mowing operation se-
quence incorrect
Please press the reverse mowing button before reverse
mowing.
V15 Vehicle self-test error 1. Before starting the vehicle, check that the brake is in the
engaged position.
2. Before starting the vehicle, place the cutter switch in the
off postion and check that the cutter switch is connected
properly.
3. Before starting the vehicle, place the FNR gearstick in
the N position.
4. Check that the connector underneath the seat is connec-
ted properly.
5. Do not press the cruise control button when starting the
vehicle.
6. Do not press the accelerator pedal when starting the
vehicle.
V16 Operation sequence incorrect Return the accelerator and blade switch to their initial posi-
tions.
V17 SPI communication error Restart the power supply.
12
English
EN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cramer 82LT107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cramer 82LT107 in the language / languages: All languages as an attachment in your email.

The manual is 7.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info