362104
57
Zoom out
Zoom in
Previous page
1/178
Next page
57
Cleaning and maintenance
GB
4. To do this, turn the brew unit on its head (Fig. 27).
5. Place the upper part of the adjuster (Fig. 27/1) on the the spindle
coupling (Fig. 27/2) on the base of the brew unit.
6. Turn the spindle until the distance is approx. 10 mm.
When doing this, make sure that the filter holder remains in the
starting position (Fig. 26/1).
7. Place the brew unit back into the machine >Page 54, "Cleaning
the brew unit"/Points 6-7.
The brew unit should be inserted easily and the service door can be
closed without problem. If this is not the case: Carry out Steps 2 to 6
once again.
Cleaning the filler opening
for the fresh coffee powder
1. Remove the brew unit from the machine >Page 54, "Cleaning
the brew unit"/Points 1-2.
2. Remove the cover (Fig. 1/1) from the filler opening for the fresh
coffee powder.
3. Clean the filler opening with the brush supplied (Fig. 1/10).
4. Replace the cover on the filler opening.
5. Remove any coffee residue from the service compartment before
you insert the brew unit again.
6. Place the brew unit back into the machine >Page 54, "Cleaning
the brew unit"/Points 6-7.
Cleaning the coffee outlet Clean the coffee outlet if you intend not to use the machine for a
longer period of time.
1. Remove the brew unit from the machine >Page 54, "Cleaning
the brew unit"/Points 1-2.
2. Push the coffee outlet up as far as possible (Fig. 5/1).
3. Press the clip (Fig. 29/1) to release the lock.
4. Press the coffee outlet backwards and at the same time pull it
down out of the machine.
5. Rinse the coffee outlet with hot water.
6. Put the coffee outlet back into the machine. Make sure that the
clip clicks into place again.
7. Place the brew unit back into the machine >Page 54, "Cleaning
the brew unit"/Points 6-7.
1
2
Fig. 27
Fig. 28
WARNING:
Danger of scalding: Switch the machine off and allow it to cool
before cleaning the coffee outlet.
1
2
Fig. 29
1
Fig. 30
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic kav 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic kav 3002 in the language / languages: English, German, Dutch, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info