362104
55
Zoom out
Zoom in
Previous page
1/178
Next page
55
Cleaning and maintenance
GB
7. Close the service door.
Releasing the brew unit In some cases, you may be unable to pull the brew unit out of the
service compartment.
This can happen if you switch off the machine while it is producing
coffee. In this case, it is possible that the starting position of the brew
unit does not agree with the starting position of the drive shaft.
Proceed as follows to release the brew unit:
1. Switch the machine off.
2. Remove the coffee dregs box >Page 53, "Cleaning/emptying the
coffee dregs box".
3. Keep the "Medium cup" button (Fig. 23) pressed and switch on
the machine at the same time.
4. Keep the "Medium cup" button pressed. After a few seconds, the
message "Attention release unit" appears.
5. Keep the "Medium cup" button pressed until the message
disappears.
6. You should now be able to remove the brew unit.
7. If this is not the case, then carry out the procedure another two
times.
8. Now adjust the drive shaft >Page 56, "Adjusting the drive shaft".
9. Switch off the machine and then switch it on again.
Cleaning the filters If after a period of time the coffee output has become slow or no
coffee is dispensed at all, then the filters are probably blocked. Clean
the filters as follows:
1. Remove the brew unit from the machine >Page 54, "Cleaning
the brew unit"/Points 1-3.
2. If necessary: Turn the lower filter holder (Fig. 24/1) to a position
in which you can reach it easily.
3. Clean the lower filter (Fig. 24/1) with the brush supplied (Fig.
1/10).
4. Turn the brew unit around and clean the upper filter (Fig. 25/1)
with the brush.
5. Place the brew unit back into the machine >Page 54, "Cleaning
the brew unit"/Points 5-7.
NOTE:
If the service door cannot be closed easily, then the brew unit has
not been correctly inserted.
Check the position of the brew unit. If the problem continues, then
probably the coupling of the drive shaft has not clicked into place
correctly. Proceed as described on >Page 56, "Adjusting the drive
shaft".
/ESC
OK
Power
Fig. 23
ATTENTION
RELEASE
UNIT
NOTE:
Get in contact with customer services if you still cannot remove
the brew unit.
1
Fig. 24
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic kav 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic kav 3002 in the language / languages: English, German, Dutch, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info