Manual Clatronic BZ 3740 (page 46 of 78) (English, German, Dutch, French, Italian, Polish, Spanish)

686431

Zoom out

Zoom in

1/78

BZ3740_IM 07.03.19

Connecting the Beer Keg to the Appliance

(Exception: Heineken kegs)

1. Open the dispenser lid by pressing the lid open button.

2. Use clean, cold water to ll the tank of the appliance up

to the MAX mark.

3. On the back of the beer tap you will see a button located

below the beer hose. Press this button to release the

cover (4). Lift the cover and bend the beer hose to the

side.

4. Place the keg with the mounted dispensing unit into the

tank of the appliance.

5. Put the beer hose back into the guide of the beer tap.

Close the cover by rst inserting the lug into the recess

on the beer tap.

6. Attach the beer hose to the beer connection valve of the

dispensing unit (10). You may slightly turn the keg, if nec-

essary. The click connection must audibly engage.

CAUTION:

• Check the beer connection valve and ensure it is prop-

erly attached to the dispensing unit before proceeding

with the preparation.

• Turn the pressure regulator to the “

” position.

Inserting the Carbon Dioxide (CO

) Cartridge

(Exception: Heineken kegs)

1. Remove the holder for the

cartridge (6) from the

clamps of the lid. Turn and

remove the holder.

2. Insert an unopened 16 g

cartridge (with the

round bottom rst) into the

holder.

WARNING for frostbite:

When screwing it onto the thread, do not cover the

ventilation opening of the holder with your bare hand.

Use gloves to protect your hands. This will help to

avoid cryogenic (cold) burns, if carbon dioxide acciden-

tally escapes.

CAUTION: Pressure

• Check the position of the pressure regulator! It

should be in the “

” position!

• Screw the holder with the CO

cartridge quickly and

rmly onto the thread, so that no pressure escapes.

4. Secure the holder with the CO

cartridge in the clamps

of the lid.

5. Plug the CO

feed valve onto the connector on the tting.

The click connection must audibly engage.

CAUTION:

The carbon dioxide supply line is thus opened. The

keg is pressurized.

Heineken Kegs

The Heineken kegs already contain carbon dioxide (CO

You do not need the pressure regulator or the CO

cartridge. The pressure regulator on the lid remains without

function.

1. Use the button to open the lid of the appliance.

2. Use cold water to ll the tank of the appliance up to the

MAX mark.

3. In the lid to the left of the

holder for the CO

cartridge

you will see a clamp. Attach

the hose of the CO

feed

valve to said clamp.

4. Loosen the cover (4) as

described above in order to

bend the beer hose to the side.

5. Now, place the keg in the tank of the appliance.

6. Connect the beer hose to the included adapter for kegs

of the Heineken brand. The click connection must

audibly engage.

7. Use a screwdriver to remove the green seal of the keg.

8. Fit the adapter to the Heineken keg.

9. Put the beer hose back into the guide of the tap. Close

the cover by rst inserting the lug into the recess on the

beer tap.

Disassembly:

If you want to remove the adapter

from the Heineken keg, press the

corrugated sides of the adapter

while you remove it. Otherwise the

adapter may be damaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic BZ 3740 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic BZ 3740 Manual

Product: