Manual Clatronic BZ 3740 (page 44 of 78) (English, German, Dutch, French, Italian, Polish, Spanish)

686431

Zoom out

Zoom in

1/78

BZ3740_IM 07.03.19

• Only use the 16 g CO

cartridges intended for the dispenser. The

use of other cartridges will invalidate the warranty.

• Do not remove the CO

cartridge before it is completely emptied.

• Only dispense of the CO

cartridge when empty.

Unpacking the Appliance

1. Remove the appliance from its packaging.

2. Remove all packaging material such as plastic lms, ller

material, cable ties and cardboard packaging.

3. Sensitive surfaces are possibly protected with foil.

Remove these foils.

4. Check the content for any missing parts.

5. In the event that the packaging content should be incom-

plete or if damages are noticeable, do not operate the

appliance. Return it to the dealer immediately.

NOTE:

There may be dust and production residue on the

appliance. We recommend cleaning the appliance as

described under “Cleaning”.

Overview of the Components /

Scope of Delivery

1 Buttons / (temperature adjustment)

2 LED temperature indicator

3 Pressure regulator for carbon dioxide

4 Beer hose cover

5 Fitting for the connections

6 CO

cartridge holder

7 Lid

8 CO

feed valve

9 Keg holder

10 Beer connection valve

11 Ventilation slots

12 Power cord

13 Main switch

14 Collecting tray

15 Drip tray

16 Drain lever

17 Beer tap

18 Lid opener

19 Tap handle

20 Cleaning balloon

21 Cleaning hose

22 Universal adapter

23 CO

cartridge

24 Adapter for Heineken kegs

No Illustration

Keg tap

Spare silicone ring for the keg tap thread

Spare CO

cartridge

Spare universal adapter

Spare adapter for Heineken kegs

Notes for Use

• When transporting the beer dispenser, always carry it

holding the bottom edge and not by the beer tap, lid or

power cord.

• Only use the dispenser with the correct beer keg.

• Do not place any objects on the dispenser.

• Follow the instructions on the kegs.

• Check that the kegs are tight and undamaged! Ensure

that the keg lid is not dented so that the clamps of the

dispensing unit can grip under the edge of the lid.

• Do not use beer that has already reached the best

before date.

• Before placing the keg into the appliance, store it in a

cool environment (but not in the freezer compartment)

for 12 hours.

• Never shake the keg before using it.

• Do not expose the kegs to direct sunlight.

Installation

WARNING:

Before tting or removing any parts, always disconnect

the plug from the mains socket!

1. Place the beer dispenser on a stable, horizontal, level

and non-slip surface. Ensure that there is at least 15 cm

of space around the dispenser for optimal operation.

2. Place the drip tray on the collecting tray. Now, slide the

collecting tray to the front of the appliance until it clicks

into place. Make sure the collecting tray does not pro-

trude beyond the base.

3. Attach the tap handle. The attened

side of the handle points forward. En-

sure that the silicone ring is in the right

place. Make sure the handle is fully

seated on the tap.

4. Dispensing unit: Make sure the silicone

ring has been inserted into the threaded

part of the keg tap. Then put the tting

through the barrel holder. Make sure the

lug on the tting is seated in the recess

of the keg holder. Screw the keg tap

onto the tting. Now the keg holder is

sitting between the tting and the keg tap.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic BZ 3740 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic BZ 3740 Manual

Product: