Manual Cisco Cisco SPA112 VoIP (page 52 of 136) (English)

650695

Zoom out

Zoom in

1/136

Configuring the Voice Settings

Provisioning

Cisco SPA100 Series Administration Guide 60

Resync Random

Delay

The maximum value for a random time interval that the ATA waits

before making its initial contact with the provisioning server. This

delay is effective only on the initial configuration attempt

following power-on or reset. The delay is a pseudo-random

number between zero and this value.

This parameter is in units of 20 seconds; the default value of 2

represents 40 seconds. This feature is disabled when this parameter

is set to zero.

This feature can be used to prevent an overload of the provisioning

server when a large number of devices power-on simultaneously.

Default setting: 2 (40 seconds)

Resync At (HHmm) The time of day when the device tries to resync. The resync is

performed each day. Used in conjunction with the Resync At

Random Delay.

Default setting: blank

Resync At Random

Delay

Used in conjunction with the Resync At (HHmm) setting, this

parameter sets a range of possible values for the resync delay. The

system randomly chooses a value from this range and waits the

specified number of seconds before attempting to resync. This

feature is intended to prevent the network jam that would occur if

all resynchronizing devices began the resync at the exact same

time of day.

Default setting: 600

Resync Periodic The time interval between periodic resyncs with the provisioning

server. The associated resync timer is active only after the first

successful synchronization with the server. Setting this parameter

to zero disables periodic resynchronization.

Default setting: 3600

Field Description

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco Cisco SPA112 VoIP Manual

Product: