650695
50
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
SIP
Cisco SPA100 Series Administration Guide 58
1
Linksys Key System Parameters
STUN Server IP address or fully-qualified domain name of the STUN server to
contact for NAT mapping discovery.
Default setting: blank
EXT IP External IP address to substitute for the actual IP address of the
ATA in all outgoing SIP messages. If 0.0.0.0 is specified, no IP
address substitution is performed.
If this parameter is specified, the ATA assumes this IP address
when generating SIP messages and SDP (if NAT Mapping is
enabled for that line) However, the results of STUN and VIA
received parameter processing, if available, supersede this
statically configured value.
This option requires that you have (1) a static IP address from your
Internet Service Provider and (2) an edge device with a symmetric
NAT mechanism. If the ATA is the edge device, the second
requirement is met.
Default setting: blank
EXT RTP Port Min External port mapping number of the RTP Port Min. number. If
this value is not zero, the RTP port number in all outgoing SIP
messages is substituted for the corresponding port value in the
external RTP port range.
Default setting: blank
NAT Keep Alive
Intvl
Interval between NAT-mapping keep alive messages.
Default setting: 15
Redirect Keep Alive Enables or disables NAT Redirect keep alive messages.
Default setting: no
Field Description
Linksys Key System To enable operation with the Cisco SPA9000, choose yes.
Otherwise, choose no.
Default setting: no
Multicast Address The multicast address for devices in the Cisco SPA9000 voice
network.
Default setting: 224.168.168.168:6061
Field Description
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info