650695
54
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Provisioning
Cisco SPA100 Series Administration Guide 62
1
Profile Rule This parameter is a profile script that evaluates to the provisioning
resync command. The command is a TCP/IP operation and an
associated URL. The TCP/IP operation can be TFTP, HTTP, or
HTTPS.
If the command is not specified, TFTP is assumed, and the address
of the TFTP server is obtained through DHCP option 66. In the
URL, either the IP address or the FQDN of the server can be
specified. The file name can have macros, such as $MA, which
expands to the ATA MAC address.
Default setting: /spa$PSN.cfg
Profile Rule B:
Profile Rule C:
Profile Rule D
Defines second, third, and fourth resync commands and associated
profile URLs. These profile scripts are executed sequentially after
the primary Profile Rule resync operation has completed. If a
resync is triggered and Profile Rule is blank, Profile Rule B, C, and
D are still evaluated and executed.
Default setting: blank
DHCP Option To Use DHCP Options, delimited by commas, retrieves firmware and
profiles.
Default setting: 66.160.159.150
Transport Protocol Transport Protocol retrieves firmware and profiles. If none is
selected, TFTP is assumed and the IP address of the TFTP server is
obtained from the DHCP server.
Default setting: https
Log Resync Request
Msg
This parameter contains the message that is sent to the Syslog
server at the start of a resync attempt.
Default setting: $PN $MAC -- Requesting resync $SCHEME://
$SERVIP:$PORT$PATH
Log Resync Success
Msg
Syslog message issued upon successful completion of a resync
attempt.
Default setting: $PN $MAC -- Successful resync $SCHEME://
$SERVIP:$PORT$PATH
Log Resync Failure
Msg
Syslog message issued after a failed resync attempt.
Default setting: $PN $MAC -- Resync failed: $ERR
Field Description
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info