Manual Cisco Cisco SPA112 VoIP (page 23 of 136) (English)

650695

Zoom out

Zoom in

1/136

Configuring the Network

Basic Setup

Cisco SPA100Series Administration Guide 29

Network Settings for the LAN and DHCP Server (SPA122 Only)

Use the Network Setup > Basic Setup > Network Settings page to set the IP address and

subnet mask for your local network. Also configure the settings for the built-in DHCP server

(SPA122 only).

Enter the settings as described below. After making changes, click Submit to save your

settings, or click Cancel to redisplay the page with the saved settings.

Router IP

Enter the Local IP Address and Subnet Mask for your local network. The default setting is

192.168.15.1 with a subnet mask of 255.255.255.0.

DHCP Server Setting

Field Description

DHCP Server The ATA can use the built-in DHCP server to dynamically

assign IP addresses to connected devices. Click Enabled to

enable the DHCP server, or click Disabled to disable this

feature.

Default setting: Enabled

IP Reservation: Click the Show DHCP Reservation button to view and manage

the DHCP client list. Click the Hide DHCP Reservation button

to hide the list. When the list is displayed, you can perform the

following tasks:

• To reserve a static IP address for a current DHCP client:

Check the box for the client in the Select Clients from

DHCP Tables list. Click Add Clients. The selected

clients are added to the Clients Already Reserved list.

These clients have static IP addresses that do not change.

• To add a client that is not in the Select Clients from

DHCP Tables list: Type a name for the client in the Enter

Client Name box. Enter an IP address for this client in

the Assign IP Address box. Enter the MAC address in

the following format: 00:00:00:00:00:00. Click Add.

• To remove a client from the Clients Already Reserved

list: Check the box for the client. Click Remove.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cisco Cisco SPA112 VoIP Manual

Product: